Beer Brewing and Kegging Supplies 1-313-277-2739 Serving Homebrewers Since 1999
0 Item(s)
$0.00
CHECKOUT
USA, Canada, Global Shipping
Home>All Grain Brewing>Complete All Grain Systems
15.5 Gallon All Grain Brewing System

15.5 Gallon All Grain Brewing System

Item Number 1809
Send us your review of this item Send us your review of this item
Your Price: $1,400.00
On sale:
$1,299.00
On Sale
Add An Option? Click and Flame Butane Lighter [+$2.99]
Add Another March Pump [+$145.00]
Add 1, 1/2" FPT x 3/4"female Garden Hose Fitting [+$3.99]
Add 1, 1/2"FPT x 3/4"Male Garden Hose Fitting [+$3.99]
Add 1 SS Braided Hose [+$13.99]
Add Another Spring Hose Clamp [+$1.99]
Upgrade HLT or Boil Kettle to a 2 weld pot [+$36.00]
Add a 2" AIH Thermometer [+$15.99]
Add a Big Daddy long stem thermometer [+$12.99]
Quantity
Reward Points 1299 points will be rewarded to you when you buy this item.
Add to Gift Registry Add to Wish List
Questions about this item? Ask here. Questions about this item? Ask here. (See 3 Questions)

Assembly required - Can Take 2 weeks for Delivery 
 

This is a 15.5 gallon all grain brewing system which allows you to be able to brew 12 gallon batches with ease. Economically, this system comes with one pump to be used on your mash tun. With a little manual sparging, using a small 1 or 2 quart scoop, you can gently pour the sparge water on top of the mash as you sparge. Once your done sparging, you would simply switch it over to the boil kettle. For added convenience, you could simply add another pump to this system. Below you can also upgrade your HLT and Boil Kettle to a 2 weld pot, for installing a thermometer instead of a long stem clip on thermometer. It also comes with our own 220 BTU 3 burner system.
 

Below you will find a list of items that come with this system:
  • 1-Two Weld Mash Tun
  • 1-One Weld HLT Kettle
  • 1-One Weld Boil Kettle
  • 1-False Bottom and Legs (mash)
  • 1-10" Flat False Bottom (boil)
  • 1- AIH 1/2" NPT 2" Thermometer (mash)
  • 1- 1/100th March Pump w/Fittings,
  • 3-14" Burner System W/ Regulator and Hoses
  • 1-SS Braided Hose
  • 1-1/2" x 50' Cooling Coil
  • 1-wooden Kero Mash Paddle
  • 3-Brass Ball Valve Assemblies (full port) w/ garden hose fitting
  • 3-Dip Tube Assemblies (2 long, 1 short)
  • 1-Spring Hose Clamp
  • Lids are NOT included

Q: Is the short dip tube supposed to be used with the mash tun and the long dip tubes with the HLT and boil kettle?
Asked by: - 1/16/2014
A: You are correct, as the false bottom does not allow for a long dip tube to reach the middle.
Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.
Answer provided by:
Q: Can this be upgraded to put a T on the outlet of mash tun to hold a thermometer for Hermes ricirc?
Asked by: - 12/7/2013
A: You could do this, with Item Number 73-3503.
Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.
Answer provided by:
Q: Are these your new keg? Are the Welds all in front?
Asked by: - 11/29/2013
A: Yes, this is all new kegs and the welds are all in front.
Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.
Answer provided by:

Customers Also Bought...
Your Price: $529.99
Your Price: $370.95
Your Price: $2,999.00
Sale: $2,599.00 On Sale