Beer Line Cleaning Kit - D System

Beer Line Cleaning Kit - D System - 1.3 Gallon

"D" system is the most common system used in the US, also known as American Sankey. It is used by all the major breweries - Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries.

Beer Line Cleaning Kit Features:

Makes it quick and easy to clean party pumps, short distance commercial beer systems, or even home keg refrigerators.
Cleaning takes less then 15 minutes!
Keeps the beer tasting brewery fresh by removing buildups (of bacteria, molds, yeast, and beer stone) from your beer lines, faucet, and keg coupler.
Everything needed for cleaning is included.

Setup:

1) Remove cleaning bottle cap. Make sure dip tube is

pressed onto bottle cap, if not hold under hot water

before applying to cap
2) Mix warm ( not hot ) water and detergent per

manufacture's instructions on container

3) Place bucket under beer faucet

Cleaning: Beer Line

            1) Dis-connect coupler from keg and connect to cleaning
                bottle
            2) Engage keg coupler, bottle will pressurize filling the line
                with cleaning solution

Rinsing: Beer Line

1) Dis-connect keg coupler from cleaning bottle

2) Pull pressure releif valve on bottle to releive bottle

pressure

3) Unscrew bottle cap. Discard unused solution and

thoroughly rinse bottle

4) Refill bottle with cold fresh water

5) Re-connect keg coupler to bottle

6) Engage coupler. Bottle will pressurize filling the beer line

rinse water

7) Open faucet to allow cleaning solution and fresh water to

flow out

8) Allow bottle to empty completely of rinse water

Specifications:

Bottle Size	1.3 Gallon (5 Liter)
Bottle Material	Polyethylene (H.D.P.E.) with UV Stabilizer
System	American "D"
Bottle Dimensions	8-1/2" Diameter x 15-1/4" Height
Bottle Max Pressure	60 P.S.I.
Operating Temperture	36 to 68F (2 to 20C)