10 Gallon 1 Weld Volume Marked Brew Pot

17 Review(s) Send your review

On sale: $60.00

Retail Price:$79.99

Your Savings:$19.99(25%)

Questions? Ask here.

Item Number: 73-0808

Availability: In stock Free Shipping

Feature: pot, kettlesale

Feature: 7

Brew Pot Necessities

Add A Ball Valve Assembly?

Add A Kettle Plug?

Quantity

60 points will be rewarded to you when you buy this item.

Description
CUSTOMER REVIEWS
Questions and Answers

10 Gallon 1 Weld Volume Marked Brew Pot

18 gauge with one 1/2" NPT welded female couplings. Perfect for a 1/2" ball valve assembly on the outside and a bazooka screen on the inside. Pot measures approximately 14" (diameter) by 16.5" (height) and weighs just under 10 lbs. Inner Dimensions are 13 5/8" wide x 16 1/4" high. The inside of the pot features 1/4 gallon markings from 1/4 gallon to 10 gallons.

Add a 1/2'' ball valve assembly and a thermometer for a complete all grain pot.

Not Induction-Compatible

Lovely brew pot, but I was disappointed to learn that 304 stainless steel doesn't work with induction cooktops.

Reviewed by: Tom from USA on 10/17/2019

Is this the greatest brew kettle ever?

No, this isn't the greatest brew kettle ever. Is it dirt cheap without sacrificing too much quality? Absolutely. Face it, if you had the money you'd be using something way nicer than this. There's a $300+ Blichmann pot with all the bells and whistles made of stainless steel that can block a bullet that you would buy for your gas set up that's probably way better than this pot. But if you're like me, you're getting this one barebones and one day when you get that raise, you'll upgrade and pass this one on to someone just getting into homebrewing. You've made the right choice for your budget and your brewing needs. You can stop looking, this is the cheapest kettle you can find from a reputable seller that doesn't have a review talking about leaky spots near the handles (yeah I saw that one on Amazon too). The 1/2" hole on the bottom looks nice and smooth, no little hidey holes for critters looking to spoil your beer. If you need a step up from this, look for a kettle with an aluminum heat spreader on the bottom for a better distribution of your heat.

Reviewed by: Jason Kalka from Dallas on 5/14/2019

First time to order

Just got my ten gallon SS kettle in. What a great value. I was impressed with the sturdiness of the walls and the weld. Based on a previous review I checked the volume measurements. Every line was spot on! Thanks AIH! As I believe in supporting my LHBS, y'all are my next go to. Can't to get it going!

Reviewed by: Mark Brister from Texas on 5/9/2019

Great product

I am using this pot for canning maple syrup. The spout works perfectly for filling the jars. The quality of the product is perfect for my use.

Reviewed by: Robert Laak from USA on 4/10/2019

Great Upgrade!

This kettle feels almost heavy duty compared to my old 5 gallon kettle. And the volume marks are true and really useful. Well made.

Reviewed by: Matt Marchman from Columbia on 3/6/2019

Quality and value

I don't think you can beat the price and I was shocked by the quality of this kettle! It is much thicker and sturdier than the economy starter kit stainless kettle I upgraded from. I was worried this might be thin and flimsy and its anything but. I haven't brewed with it yet but I look forward to it!

Reviewed by: Westley Thayer from USA on 11/5/2018

Excellent Pot

I purchased this pot to make large batches of homemade salsa and needed a threaded port to add my own fill valve. This pot works exactly as needed, is made of good material, and cleans up in a few minutes. After searching the net, this pot was by far the best value for the size, quality and features.

Reviewed by: DH from USA on 11/3/2018

Nice brew pot except for the volume marks

I used this pot for the first time today and the size is great for a 5 gallon batch. I never worried about a boil over because of the extra head space. One of the main reasons I got this pot was because of the volume marks. I was very disappointed to find out that they were off by almost a 1/2 gallon. If you get this pot I would not use the markings for an accurate measurement. Very disappointing.

Reviewed by: Edward Scheid from on 8/11/2018

Great Price

This is a great item. The price is right, the size is great, and it will get many years of use! I wanted to get into all-grain brewing and felt the 10 gallon pot was much better than the usual 8 gallon as it has more head room. It was MUCH cheaper than the Tall Boy and had internal volume markings as well. It arrived before the quote date. All-in-all, it was an excellent purchase!!

Reviewed by: Bob Sanders from on 3/24/2018

I like it!

I took a chance on this to use on an induction cooktop to brew indoors. It works very well on my induction unit! I am using a Duxtop brand unit. This is a nice pot for the price. The pot is a little heavier gauge than most other budget pots. The only draw backs are the very flimsy lid that come with it, and the handles appear to be stamped to the pot rather than welded and or riveted.

Reviewed by: Dave C. from on 2/2/2018

Works well

For the price its a nice kettle light weight. The only issue I have is the lid handle is a little close to the lid but manageable.

Reviewed by: Travis Fox from on 2/14/2017

10 gal kettle

Nice kettle at a great price.

Reviewed by: Jerry from on 12/14/2016

Worked Great

Very good pot for the money. Brewed with it the first time a few weeks ago and it worked great. Glad I got the 10 Gal as opposed to an 8 Gal.

Reviewed by: Stephen Lepley from on 6/23/2016

Really nice!!!

Really nice pot!! Welds are really good. The gallon markings are clearly visible. Perfect for what I need. Cheers! from Fresno CA. GO RED WINGS!!!

Reviewed by: Donnie from on 4/18/2016

Great Value

Just moved to all grain and needed something bigger than the 4 gallon pots I had been using for extract. Very nice pot, High quality, and the etched volume markings are easily readable. Fits with a few inches to spare between the stove burner and the microwave hood.

Reviewed by: Scott Haggard from on 1/26/2016

Just what I wanted!

I almost bought an 8 gallon kettle from AIH just because it was on super sale, but was swayed by my boss from the brewery I bartend at to buy a 10 gallon kettle with a single weld. I'm very glad I got more space even though I only do 5 gallon batches. I can comfortably add hops and don't have to worry about a boil over even with 6.5 gallons in the kettle. I would also recommend buying the larger bazooka filter to use on the inside.

Reviewed by: Jacob Pitsch from on 12/11/2015

Good Kettle

This is a good value. It is well constructed and is not flimsy. Perfect dimensions for brewing. It is not suitable for induction burners. I am very happy with this product.

Reviewed by: David Shade from on 12/8/2015

Q: Is this 10 gallon brew pot for 59.99 made of stainless steel? Thanks

Asked by: Steve Poizat-Newcomb - 6/23/2019

A: This is made of 304 stainless steel

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (6/23/2019)

Q: is there a false bottom made to fit this vessel?

Asked by: brian hondorf - 6/20/2019

A: we do not currently have a false bottom designed for this model of kettle

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (6/21/2019)

Q: Any idea when you might get the 10 Gallon 1 Weld Volume Marked Brew Pot back in stock?

Asked by: Don Howell - 1/22/2019

A: These have unfortunately been discontinued by the current manufacturer without a current ETA to provide at this time for their return

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (1/23/2019)

Q: 10 Gallon 1 Weld Volume Marked Brew Pot When will you be expecting these to be back in stock? Thank you!

Asked by: Kelby - 11/24/2018

A: at this time we do not currently have a return ETA for this particular kettle(Nov 2018)

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (11/25/2018)

Q: Does this kettle come with a blank fitting for the port or would one have to buy a valve or other fitting before being able to use it?

Asked by: WT - 10/28/2018

A: The kettle does not come with a plug or ball valve included in the cost, but these items can be added if needed from the drop-down menu on the items page, or as a separate item from the website

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Aaron (10/29/2018)

Q: My husband has the single weld brew pot and the handle broke (one side came unattached to the pot). Do you have any suggestions for repair?

Asked by: Allison - 10/28/2018

A: You can try a product like JB Weld and this should help. Otherwise, it can be rewelded on if you have the equipment.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Lauren Acton (10/29/2018)

Q: How are the handles attached ... welded?

Asked by: James Leitch - 10/16/2018

A: The handles are riveted on.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Lauren Acton (10/16/2018)

Q: Hi, I have a question regarding all of the following products below. What grade of stainless steel are these (example: 201, 300,304) and are they food-grade? 10 Gallon 1 Weld Volume Marked Brew Pot - item # 73-0808 10 Gallon 2 Weld Volume Marked Brew Pot - item # 73-2525 15 Gallon 1 Weld Volume Marked Brew Pot - item # 73-6060 14 Gallon Brewmaster Stainless Steel Brew Kettle - item # 19-304

Asked by: Brian - 10/3/2018

A: All of our brew pots are 304 Stainless.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Lauren Acton (10/8/2018)

Q: Any special cleaning needed before the first use? Just water? Soap and water? PBW?

Asked by: Mark - 10/2/2018

A: The kettles would just need a rinse but a quick wash with PBW or another cleaner before the first use would not hurt!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (10/3/2018)

Q: Hi can you tell me the wall and bottom thickness of the kettle?

Asked by: Jerry - 10/1/2018

A: the kettles will have the same wall and base thickness of 18 gauge

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (10/2/2018)

Q: Which propane burner would you suggest for this pot?

Asked by: Adam - 5/13/2018

A: Our AIH 14" burner would be a good high output burner that would cut the lag time in boiling and can accomodate larger kettles down the road if needed. Otherwise any of the burner stand options we offer one the site would be able to accomodate the weight of the kettle and effecient boiling times

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (5/13/2018)

Q: What is the distance of the base of the port opening from the kettle bottom? to the top of the port opening from the bottom? I want to see how high a false bottom would need to be to clear the weld port.

Asked by: Tobias Watson - 2/20/2018

A: The top of the port sites at abut 1.5" and the bottom edge of the port is at .5" from the bottom of the kettle

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (2/20/2018)

Q: Is there a false bottom available for this pot?

Asked by: Tobias Watson - 2/19/2018

A: There is not currently a flase bottom we produce for the kettle at this time

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (2/19/2018)

Q: Are the volume markings stamped or etched?

Asked by: Zach - 1/6/2018

A: The markings are stamped into the side

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Aaron (1/7/2018)

Q: How far does the ball valve stick out? I think the kettle might barely fit in my sink but it might not with the ball valve. If it doesn't can I use something else, like a plastic tub, for an ice bath?

Asked by: Mark - 12/14/2017

A: The valves typically add a bout 5" or so to the kettle. So long as the tub or "bath" your using can withstand the temperatrue differences, it would be fine.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (12/14/2017)

Q: I am interested in purchasing this item. Would you please send me the measurements of the box (package) in which this brew pot would arrive? This is very important information for future transport purposes. Thank you.

Asked by: Adrian - 12/11/2017

A: The package size shipped with this kettle is 15x15x17"

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (12/11/2017)

Q: I am thinking about purchasing this pot to use as a mash tun. Do you sell a false bottom that would work with this or could I use the false bottom out of my 10 gallon Igloo cooler?

Asked by: Michael Monaghan - 1/19/2017

A: At this time we don't currently have a false bottom designed for this kettle size. The 10 gallon igloo false bottoms diameter would fit, but the pick up tube design will not adapter well to the coupling on this kettle.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Aaron (1/20/2017)

A: We do not sell a false bottom specifically for this pot. You can definitely try to use the false bottom out of your Igoo, however, I can not guarantee it will fit. These pots are always 10 gallons in volume, however, the diameter can change slightly from batch to batch as the manufacturer makes adjustments.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Lauren Acton (10/8/2018)

Q: I'm planning on using with an induction stove. Will a magnet stick to the bottom?

Asked by: Michael Maroni - 1/14/2017

A: The kettle will not work on an induction cook top as it is not magnetized.

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Aaron (1/15/2017)

Q: Affordability wise I have to go with this 10gal pot and not the 'BoilerMaker' style pot. Can you drill the 5/8" holes for me for the 120V Boil Coil for this pot also? Don't have a setup I trust to do that. And there doesn't look like there would be any problem with removing the plug and using a gas burner alternative backup heating method if required?

Asked by: Norman Chodrick - 11/10/2016

A: We will be glad to put a couple of punches in this kettle for you. Give us a call at 313-277-BREW and we can give you a hand with the details.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Tim (11/11/2016)

Q: What is the wall thickness of the kettle material?

Asked by: Shop dogs - 5/16/2016

No Answers have been submitted yet.

Questions? Ask here.

Deluxe 10 Gallon 1 Weld Volume Marked Pot

~~$110.99~~ $100.00

In stock Free Shipping

(2)

Select Options

10 Gallon BrewBuilt Kettle

$199.99

Ships From Vendor Free Shipping

(2)

Buy

10 gallon Anvil Brew Kettle

$274.97

Ships From Vendor Free Shipping

(1)

Select Options

10 gallon BoilerMaker™ G2 Brew Pot by Blichmann Engineering™

$309.99

Ships From Vendor Free Shipping

(2)

Select Options

Go to Top of Page

10 Gallon 1 Weld Volume Marked Brew Pot

Q: Is this 10 gallon brew pot for 59.99 made of stainless steel? Thanks

Q: is there a false bottom made to fit this vessel?

Q: Any idea when you might get the 10 Gallon 1 Weld Volume Marked Brew Pot back in stock?

Q: 10 Gallon 1 Weld Volume Marked Brew Pot When will you be expecting these to be back in stock? Thank you!

Q: Does this kettle come with a blank fitting for the port or would one have to buy a valve or other fitting before being able to use it?

Q: My husband has the single weld brew pot and the handle broke (one side came unattached to the pot). Do you have any suggestions for repair?

Q: How are the handles attached ... welded?

Q: Any special cleaning needed before the first use? Just water? Soap and water? PBW?

Q: Hi can you tell me the wall and bottom thickness of the kettle?

Q: Which propane burner would you suggest for this pot?

Q: What is the distance of the base of the port opening from the kettle bottom? to the top of the port opening from the bottom? I want to see how high a false bottom would need to be to clear the weld port.

Q: Is there a false bottom available for this pot?

Q: Are the volume markings stamped or etched?

Q: How far does the ball valve stick out? I think the kettle might barely fit in my sink but it might not with the ball valve. If it doesn't can I use something else, like a plastic tub, for an ice bath?

Q: I am interested in purchasing this item. Would you please send me the measurements of the box (package) in which this brew pot would arrive? This is very important information for future transport purposes. Thank you.

Q: I am thinking about purchasing this pot to use as a mash tun. Do you sell a false bottom that would work with this or could I use the false bottom out of my 10 gallon Igloo cooler?

Q: I'm planning on using with an induction stove. Will a magnet stick to the bottom?

Q: What is the wall thickness of the kettle material?

Customers Also Bought...