Q: Will this work with Blichmann Hellfire burners? I recently bought a second one, and this would be easier than having two separate regulators for two separate tanks...I'll buy one larger tank.
A: So long as the have the proper orifice to thread into the burner itself, this regulator and hose set up will work on the HellFire without issue
Q: So I have 2 of your burners and have been looking to bring them together to 1 tank. Now I know this product can do it and better than what I am currently doing. My question is, if I decide to switch over to Natural Gas eventually will these hoses still work even getting the right orfices for NG or is the PSI max an issue?
A: So long as the orifice is purchased for natural gas, and the connection for the line feed into the hoses will work with the hookup you have at home, they should be able to be utilized without issue.
Q: will the 10 psi regulator with dual ss hose work with the grip double burner cast iron item number 150129?
A: Unfortunately, we do not stock grip double burner cast iron item number 150129? It would seem the regulator would work but I see no need for the double hose as the grip burner already as two adjustments knobs.
Q: I purchased the dual 10 psi regulator for my dual propane turkey fryer to replace my old regulator and hose's and realize that my old regular is a 5 Psi ? Will this cause any problems or danger to my fryer or burners ?
A: No, that will just increase the output of your burners. Turkey fryers typically come with low pressure regulators to prevent boil overs/fires. You should be cooking with gas now!
Q: I plan on adding a Blichmann burner to my brewery. Would this hose work with a Blichmann and my current Bayou Classic SQ-14?
A: It will not work for the Blichmann, these require two different size orifices. As for the bayou, I am not familiar with that model, and from the pics I can find, I can not tell which orifice it uses.
Q: Do you sell extra 6 foot ss hoses?
A: We do not. You would have to buy an extra assembly, take the regulator off, add a 4 way cross to the two burner assembly. Then re-install everything, to make a 3 way out of a 2 way.
Q: Does the 1/4 orifice unscrew from the braided stainless steel hose so that I can replace them?
A: It does not. It has a swivel fitting, but does not unscrew.
Q: What burner will be added for the Add a Burner option? Is it item # 35-1674 burner?
A: You got it ;) The 35-1674 will be added with this option.
Q: Will this set up work with a low pressure hurricane burner?
A: If you have the proper orifice for the hurricane burner, it would work. If not you would need to purchase the Banjo orifice as well.
Q: Will this one work with the banjo burner? I have one banjo already and want to add one of you 18 in 65K stands to my system and would like to run off on tank. Thanks
A: This is the same one we use for the banjo- it will work just fine for two or even three.