10.5 Gallon Anvil Foundry All-In-One Brewing System

10.5 gallon Anvil Foundry All-in-One Brewing System

Send your review

Your Price: $369.99

Questions? Ask here.

Item Number: 54-AF105

Availability: Ships From Manufacturer (February) Free Shipping

Quantity

Description
Questions and Answers

10.5 gallon Anvil Foundry All-in-One Brewing System

New top-mounted controller for better visibility and convenient operation!

The most versatile brewing system on the market, the 10.5 Gallon Anvil Foundry All-in-One Brewing systems is loaded with innovative features, designed for homebrewers. The Anvil Foundry holds up to 16 lbs. and increases batch efficiency with the uniquely designed High Flow Grain Basket, with 150% more perforations, drastically reduces the chance of a stuck mash. Double wall insulation helps increase heating speeds and maintains mash temperatures. Linear digital power control allows you to fine tune your boil and the switchable voltage, between 120V 1600W and 240V 2800W, means faster heating and better boils. The included high capacity stainless Immersion Chiller with Hoses & Fittings quickly chills your batch after the boil.

10.5 gallon Anvil Foundry Features:

- 10.5 Gallon Capacity, perfect for 5 gallons batches!

- High Flow Grain Basket with 16 lb. Grain Capacity, virtually eliminates stuck mashes!

- Ultra Low Watt Density, Triple Element Heats, won't scorch!

- Double-Walled Insulation and Rotating Racking Arm

- Switchable Dual Voltage: 1600W at 120V & 2800W at 240V

- Temperature Precision Control: +/- 1 F

- Easy to use Digital Controls with Solid State Linear Digital Power Control and Delay Timer

- High Capacity Stainless Steel Immersion Chiller with Hoses & Fittings

Special Note.
This is shipped directly from the manufacturer. Please allow for processing time and ground shipping. It can only ship to physical addresses within the contiguous 48 states. A signature for delivery is required.

Q: Is there a lid to allow this to be used for spirit distillation, if so is there a part number?

Asked by: Alan Swanson - 1/11/2021

A: there is not currently a distilling lid designed to fit the foundry systems at this time

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/12/2021)

Q: I noticed that this system doesn't have a recirculation pump. Can I use a Chugger brew pump with this system?

Asked by: Eddie Bray - 1/4/2021

A: An external pump with the correct fittings to attach to the bulkhead can be used

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/4/2021)

Q: Thank you for your prompt response to my question. I have another question. I saw on a youtube video that a recirculation kit is sold separately. It comes with a pump and a top screen. Since I will be using my own external pump, can I purchase the top screen when I purchase this system.

Asked by: Eddie Bray - 1/4/2021

A: The recirculation kit is available for purchase separately on item ID 54-AFR001

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/5/2021)

Q: Does this kit come with a pump?

Asked by: Sandra Randall - 12/4/2020

A: this system would not have the pump included Item ID 54-AF105R would be the model with the pump

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (12/4/2020)

Q: Hi interested in purchasing a system. What are the benefits of having a recirculation pump? weighing in on the cost.

Asked by: robert szklany - 11/27/2020

A: Based on the temperature in the mash tun, the heating element may turn on and off to heat the wort being circulated through the kettle. ... The advantage of these systems is that they are time saving and allow for constant recirculation during the entire mashing process, which makes a much clearer beer.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (11/27/2020)

Q: what kind of warranty does this unit have

Asked by: Gregory Steinhouse - 11/26/2020

A: Unit has a one year warranty

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Mike (11/27/2020)

Q: Does the foundry ever go on sale? Unfortunately, this is out of my budget and I'd really like to get into indoor electric brewing and believe this is the best bang for your buck all in one system that would best suit my needs. If not, I will just wait until it's affordable for me. Thank you, Kameron

Asked by: Kameron Hanjani - 10/29/2020

A: Anvil has a set standard MSRP or MAP pricing so they dictate the cost retailers can offer on their products

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (10/29/2020)

Q: The Anvil 10.5 Gallon all in one the top mount controller? Thanks, Joe

Asked by: Joseph Curtin - 8/10/2020

A: This would be the newer model unit with the top mounted controller

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (8/11/2020)

Q: What's the boil off rate? How much wort is beneath the false bottom/basket? How much wort is left behind when draining the kettle?

Asked by: Mark - 8/8/2020

A: These specs are not listed by the manufacturer. The online estimate from users is that the boil-off rate is around 1/2 gallon per hour and this unit has a pick up tube inside the boiler to collect wort from the bottom of the kettle to minimize loss.

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (8/9/2020)

Q: I just moved to Hawaii, looking to get back into brewing. There's a line saying that since this ships from the manufacturer, it's only available in the continental 48 states. Does this mean I'm out of luck?

Asked by: Gavin McCall - 7/24/2020

A: Anvil will only ship within the lower 48 if ordering from them directly. We do mail to all 50 states and internationally when ordering from our site, and will give a shipping calculation in the checkout screen to view before making payment

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (7/25/2020)

Q: Is this able to reach a boil in 120v

Asked by: jarrod brown - 6/16/2020

A: the 120v unit will reach a boil but can take about 45-60 minutes to achieve a boil

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (6/16/2020)

Q: Can you sustain temperatures for long periods for procedures such as sour kettling?

Asked by: Drew Peccerillo - 2/29/2020

A: The temp controller has a 9 hour timer it can stay set at for holding specific temps for long time periods

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (3/1/2020)

Q: Is this system also a fermentation chamber.

Asked by: Chris - 2/17/2020

A: The units intention is for use in mashing and boiling to create a beer wort, but could potentially add an airlock to the lid of the fermenter to allow for fermenting with the container as well if needed.

Was this answer helpful? 3 of 3 Guest(s) found this Answer helpful.

Answer provided by: Lauren Acton (2/17/2020)

Q: can wine be distilled in the 10.5 gallon Anvil Foundry All in one Brewing system.

Asked by: Andre T Lovato - 1/31/2020

A: removing the handle on the lid, and applying the proper condenser, the unit can be used for distillation as well as boiling for brewing

Was this answer helpful? 0 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/31/2020)

Q: Hello. I recently bought a Anvil 10.5 foundry all in one with no recirculation kit. I brewed my first batch this past weekend. And I found a lot of grains in my fermenter. My question is, Will the recirculation pump help solve that issue? Or was it something else that I might’ve done? Either way I’m going to buy the recirculation kit this weekend. Thank you in advance Also, what 5 gallon keg do you recommend? A ball lock or key luck? Thank you.

Asked by: daniel cabrera - 1/28/2020

A: Making sure the grain screen in the boilers seated properly before mashing in along with recalculation can help move smaller grain particulate back onto the top of the grain bed to aid in filtering those pieces out before you move to the fermenter. The kegging either keg style will work well. Ball lock has the advantage of being able to be produced in new stock for the kegs themselves so availability of new parts and kegs is prefered by some brewers

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/28/2020)

Q: With this set do you need a false bottom?

Asked by: Daniel Cabrera - 1/10/2020

A: This unit includes a High Flow Grain Basket with 16 lb. Grain Capacity. This virtually eliminates stuck mashes!

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Lauren Acton (1/11/2020)

Q: What is the warranty on this? I had a similar system that had it's heating element die at 1 year.

Asked by: Devin P Condon - 12/27/2019

A: From Anvils Site:

ANVIL Brewing Equipment warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. ... This product is for home use only.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (12/27/2019)

Q: What all can you do with this? Can you ferment?

Asked by: Taylor bates - 12/25/2019

A: The units intention is for use in mashing and boiling to create a beer wort, but cold potentially add an airlock to the lid of the fermenter to allow for fermenting with the container as well if needed

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Aaron (12/26/2019)

Q: is this only for all grain? or can we do extract brewing also?

Asked by: William Bates - 12/10/2019

A: while designed for all grain brewing, the coiler can be used for extract batches as well

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (12/10/2019)

Q: Can the recirc option be added later?

Asked by: Marc - 11/14/2019

A: the pump kit is available as a spare option on item ID 54-AFR001

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Aaron (11/14/2019)

Questions? Ask here.

10.5 gallon Anvil Foundry All-in-One Brewing System with Recirculation Pump Kit

$544.99

Ships From Manufacturer (February) Free Shipping

(7)

Buy

6.5 gallon Anvil Foundry All-in-One Brewing System

$274.99

Ships From Manufacturer Free Shipping

Buy

6.5 gallon Anvil Foundry All-in-One Brewing System with Recirculation Pump Kit

$412.49

Ships From Manufacturer Free Shipping

Buy

Robobrew | Brewzilla All Grain Brewing System 9.25 Gallons

$349.99

Not currently for sale.
Free Shipping

Go to Top of Page

10.5 gallon Anvil Foundry All-in-One Brewing System

Q: Is there a lid to allow this to be used for spirit distillation, if so is there a part number?

Q: I noticed that this system doesn't have a recirculation pump. Can I use a Chugger brew pump with this system?

Q: Thank you for your prompt response to my question. I have another question. I saw on a youtube video that a recirculation kit is sold separately. It comes with a pump and a top screen. Since I will be using my own external pump, can I purchase the top screen when I purchase this system.

Q: Does this kit come with a pump?

Q: Hi interested in purchasing a system. What are the benefits of having a recirculation pump? weighing in on the cost.

Q: what kind of warranty does this unit have

Q: The Anvil 10.5 Gallon all in one the top mount controller? Thanks, Joe

Q: What's the boil off rate? How much wort is beneath the false bottom/basket? How much wort is left behind when draining the kettle?

Q: I just moved to Hawaii, looking to get back into brewing. There's a line saying that since this ships from the manufacturer, it's only available in the continental 48 states. Does this mean I'm out of luck?

Q: Is this able to reach a boil in 120v

Q: Can you sustain temperatures for long periods for procedures such as sour kettling?

Q: Is this system also a fermentation chamber.

Q: can wine be distilled in the 10.5 gallon Anvil Foundry All in one Brewing system.

Q: With this set do you need a false bottom?

Q: What is the warranty on this? I had a similar system that had it's heating element die at 1 year.

Q: What all can you do with this? Can you ferment?

Q: is this only for all grain? or can we do extract brewing also?

Q: Can the recirc option be added later?

Guests Also Bought...