Q: do you sell a filling wand that fits this large diameter siphon
A: item ID 24-4867 would be the correct filling wand to use with the larger 1/2" ID tubing
Q: Hi, I am looking to siphon a fermented wine to bottles. I was wondering if you could make some recommendations? I was thinking of getting this siphon and the (Fermtech Pro Bottle Filler) but do I need some extra tubbing for this if so which one?
A: this can be used with the filler on item ID 24-4867 and the tubing ID 24-4854a
Q: Is this siphon tube and racking cane set food grade? If so, is there any certification information available? Thanks!
A: these are made from a food grade PET material. The vendor does not currently list any certifications we can provide at this time
Q: What is the OD of the outer tube of the auto siphon? Will it fit through the hole for a #6 bung plug?
A: the OD of the center tubing is 1/2" and would be a bit large for the 3/8" driller opening that is standard on Bungs
Q: Is this a fermtech brand siphon?
A: Yes, These are currently the Fermtech brand
Q: How long is this siphon?
A: This siphon is 26" long.
Q: Are these the same length as the smaller diameter auto siphons?
A: No, it's a couple inches longer.
Q: I just bought 1/2" auto siphon with 1/2" tubing. Did I get the wrong size tubing? I couldn't get the tubing connected to the siphon (assumed I'd slip the tubing over the lip of the auto siphon, but couldn't do it.
A: You have the correct line, it's just a tight fit. If you warm the end of the siphon tube in hot water for a minute, it will soften it and make it easier to stretch over the end of the center racking tube. DO hold the racking tube close to where the tube connects - not along the long part - to avoid snapping the racking cane in the bend!