Q: I need a pass-through coupler for the gas line into a kegerator. Is this the right fitting for that, or is there a better option?
A: item #91-4651 is a good option for a pass through for gas. You would need the proper nut and tail piece connection to get to the right barb size, but this shank gives you plenty of use-able thread for a cooler or fridge wall connection
Q: What connection do I need to connect this to a quick disconnect (73-4110)?
A: We do not currently carry a tail piece assembly that would allow these quick disconnects to attach onto the back side of a shank assembly.
Q: what nipple assembly size do I need to connect gas line?
A: Beer line is connected to the back of these which is 3/16 hose on a 1/4 size barb and gas line uses 5/16 hose on 3/8 size barb.
Q: Will this fit on the shank? Wing Nut, 29/32"-14 thread
Item Number 40-3371
A: Absolutely. This wing nut has the same threads as a standard beer nut.
Q: What's the bore size?
A: The bore size on this jockey box is 5/16" in diameter.
Q: Do you have this in stainless steel?
Q: further question: What is the maximum wall thickness that can be permitted when the faucet and beer line are attached?
A: Roughly 1'' thickness.
Q: This nipple is threaded 5/8?
A: There is no nipple on the shank. The shank itself is a 7/8" thread though.
Q: Would I need to purchase additional washers for this shank?
A: The Shank for the jockey box comes with one washer which will help to keep the temperature inside your cooler.