5 Gallon Igloo Cooler False Bottom Hardware - Stainless

5 Gallon Igloo Cooler False Bottom Hardware - Stainless

5 Gallon Igloo Cooler False Bottom Hardware - Stainless

1 Review(s) Send your review

Your Price: $58.99

All Stainless Steel

Questions? Ask here.

Item Number: 99-2865

Availability: In stock - Ann Arbor

Add false bottom?

No thanks Yes add 5 gallon false bottom [+$39.99]

Quantity

59 points will be rewarded to you when you buy this item.

Description
PRODUCT REVIEWS
Questions and Answers

Stainless Steel 5 Gallon False Bottom Assembly

Our false bottom assembly is designed for use with our domed 9" false bottom with a 7/8" ID hole in the middle for the elbow to pass through. It includes all fittings from the false bottom to the ball valve and hose barb. Our compression fitting design incorporate a stainless steel tube which essentially "Hard Plumbs" the false bottom into place. The false bottom will NOT float. The fitting that goes through the cooler wall was custom-designed for the Igloo coolers to minimize parts and insure a good seal.

Q: I'm looking for a false bottom set-up for my 5 gallon Menards cooler. The interior is just short of 10 inches. What other hardware would I need besides a (presumably) 9-inch false bottom? I already have a 1/2'' x 2'' nipple and bolts, plus valves and tubing for outside the cooler. Thanks.

Asked by: Walter - 11/10/2019

A: The full false bottom assembly can be purchased together on part ID 99-3068. This would be the best bet if you need about 90% of the parts to complete the build out of the Igloo cooler you have on hand

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (11/11/2019)

Q: Could you send me instructions on how to install my 9" false bottom and stainless steel ball valve and hardware to my igloo cooler? [email protected] I have tried to loosen and attach and it is so securely tightened that I fear Im trying to take apart at the wrong nut??? Thanks

Asked by: Tim Lull - 4/11/2018

A: We do have a how to instructional video on the MAsh tun's item page using item #99-0036 Click on the Video tab and our owner does a quick walk through of the assembly

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (4/11/2018)

Q: What diameter does the bulkhead hole have to be?

Asked by: David - 6/29/2017

A: a 7/8 to 1" hole would accommodate the bulkhead

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (6/29/2017)

Q: What is the tubing Barb size please?

Asked by: john helcher - 5/12/2017

A: The barb fitting on the end of the ball valve is 3/8"

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (5/13/2017)

Q: How does it connect to the false bottom? Picture has nut on top, but what holds it down to the screen?

Asked by: Chuck - 12/9/2015

A: The lock nut is snugged down to the false bottom itself to keep it from floating. There is no nut on the bottom, the plumbing hardware and lock nut are enough to keep the false bottom in place and performing perfectly.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Carson (12/10/2015)

Q: What is the diameter of the fitting that goes through the cooler wall?

Asked by: mark - 2/14/2015

A: The diameter of this fitting is proprietary information, we have these fittings custom made for Igloo coolers.

Was this answer helpful? 1 of 4 Guest(s) found this Answer helpful.

Answer provided by: Carson (2/16/2015)

Q: Hello, I have an igloo 5 gallon cooler but it is not the yellow one you guys have displayed on this website. I would guess all igloo coolers are the same size, but would this assembly and false bottom work with mine?, again is not the yellow igloo is a 5 gallon igloo cooler but it is grey color. Another question, does this packet come with washers for the spigot assembly? Thank you for your help

Asked by: David - 8/30/2014

A: Hi, As long as it is an igloo cooler and not a Rubbermaid our assembly will work as long as it is a Igloo cooler. This particular item will give you all the parts you need except the false bottom. If you are looking for the entire false bottom and valve system you want item number Item Number 99-306.

Was this answer helpful? 0 of 1 Guest(s) found this Answer helpful.

Answer provided by: Paul Burton (9/2/2014)

Questions? Ask here.

9" Stainless Steel Domed False Bottom

$39.99

In stock

(5)

All Stainless Steel Mashing Made Cooler False Bottom 5 Gallon

All Stainless Steel Mashing Made Cooler False Bottom 5 Gallon

$68.99

In stock

(5)

10 Gallon Igloo Cooler False Bottom Hardware Stainless Steel

10 Gallon Igloo Cooler False Bottom Hardware Stainless Steel

$60.00

In stock - Ann Arbor

(3)

All Stainless Steel Mashing Made Cooler False Bottom 10 Gallon

All Stainless Steel Mashing Made Cooler False Bottom 10 Gallon

$99.99

In stock Free Shipping

(9)

Go to Top of Page