Q: Is the stainless portion of this filler manufactured by Krome? I have one from them, and it fits a bit too snugly. I'd prefer to not use keg lube on the interior of my taps, if possible.
A: We gather this part from perlick directly but can’t confirm their source for the parts being alone dispense or another supplier
Q: Hi. Does this fit the Perlick 690 faucets also?
A: This model should fit any of the 600 series Perlick Faucets
Q: Hello. Do you carry the replacement o-rings for the Perlick growler filler?
A: the gaskets are not currently available for ordering at this time
Q: I'm not sure of the faucet I have. I have a single tap insignia kegerator. The ID of the faucet appears to be either slightly less than 7/16" or right on 7/16". Should this filler fit? Already bought the other size that didn't fit, item 40-3124.
A: 99% of kegerator ship using a standard faucet design of which the 40-3124 would be the best bet. There are a few kegerator suppliers who use non-standard parts and proprietary faucets, so changing of the faucet to either a standard model to fit the 40-3124 or a Perlick model faucet, which would fit this particular filler, would be the best bet
Q: Is this an actual Perlick GT600, or some other brand?
A: we do use other vendors for the product if Perlick does not have them available but currently (may2018) will be shipping perlick branded models
Q: how long is the tube to fill the growler? Can it be longer?
A: The tube provided is about 10"-12" long but it can be extended with a piece of 5/16" ID tubing added after the item is shipped to suit your length
Q: Can this growler fillerbe attached to a racking cane via hose clamp and with a #2 stopper be used to counter fill bottles?
A: This filler is not as easily adapted for this purpose. Item#24-4866 would be better suited for what your trying to accomplish
Q: could this product be used to bottle beer straight from the faucet using 650SS faucets? Would the carbanation hold for more than 2 weeks, could this be an alternative to buying a counter pressure filler?
A: These style fillers can be used to filler bottles smaller than a growler, but would not function the same as a counter pressure filler. The tubing, even at a lower pressure, displaces enough co2 out of solution that the carbonation would only last a week or so. We could not guarantee a time frame before the beer would lose carbonation.
Q: What diameter are the o-rings used with this growler filler?
Q: Does this work with the 630 pc chrome faucets?
A: Yes, it is compatible with the Perlick 630PC
Q: will this fit my 690ss ?
A: Yes it will fit 630, 650, 680 and 690
Q: Will this growler filler work with the older 525SS faucets?
A: No, the faucets are slightly different, and this doesn't fit.
Q: what is the diameter of the faucet insert? I currently own two growler fillers that do not fit my perlick faucet, of which the model number I know not.
A: 3/8 of an inch is the measured diameter for this particular growler filler.
Q: What length of 5/8" thickwall gas line comes with this growler filler?
A: The 5/8" thickwall gas line is 12" in length.
Q: Will this work with the Perlick 650SS? If not do you sell one that will?
A: This does work with the Perlick 650ss Flow Control faucet.
Q: What is the barb size on this filler?
A: This item has a 3/8" barb, which will work great with out 5/16" ID gas line. This thickwall 5/16" pvc gas line is what comes with the filler.