AIH 8 Gallon Fermenting Bucket with Lid
Introducing the new AIH bucket, doesn't stain or retain odors.
Lid is drilled with a grommet for the airlock. These buckets are made of a high grade silicone, polyproylen copolymer.
Has a threaded UN-drilled hole. Can be converted to a bottling bucket, by adding a bottling spigot. You will need to drill a 1/2" hole in the center of the threaded area, using both rubber o-rings to seal the spigot.
Tip For Attaching the Lid:. The lid can be snapped into place by holding the lid at about a 45 degree angle to the top of the bucket. Pressing down with the base of your palm in one spot on the edge of the lid, this will 'Snap" the lid onto the edge of the bucket. After getting one portion of the lid in place, you can push and down and follow the edge of the bucket lid till you feel the snap in place, around the top edge. The groove in the lid matches up with the "Male" lip on the bucket, and just takes a small amount of force to get it clicked into place properly.