Alpha 1 Barrel System (Electric) NO FRAME
By popular demand Ruby Street Brewing now offers the Alpha electric WITH OUT the frame. This system comes with everything the standard Alpha does except the frame.
Now Offering Free Shipping!
Lower 48 States Only
Because these are built to order please allow 4 weeks for delivery
Are you looking for an Electric Brewing System without a frame? One that comes almost completely assembled and ready to brew shipped right to your door? Then I urge you to really look at the Ruby Street Systems and compare them to any other system on the market. Here are just a few things to consider when comparing Ruby Street Electric Systems to other Electric Systems on the market:
Ruby Street Systems are hand built per order, with more available options and configurations than any other manufacturer. Ruby Street comes almost completely assembled and ready to brew, other systems have extensive assembly involved. Most Ruby Street systems include dial thermometers on various kettles, while some other systems do not. Ruby Street come standard with 2 false bottoms, others systems only come with 1 false bottom. Ruby Street utilizes a standard all stainless element coupled to a machined heavy duty stainless waterproof wiring housing that mounts to the kettle via TIG welded tri-clamp fitting, other systems don't offer this at all.
Ruby Street has industry standard tri-clamp sanitary fittings throughout while other systems don't. The Ruby Street electric panel has 3 digital PID controllers with temp readout of all 3 tanks, a process timer with alarm, pump switches on the panel, key switch for lockout safety, and a red mushroom emergency stop button that kills all power (pumps and elements). Other systems sometime feature two separate panels (requiring 2 outlets), only 2 PID controllers, no pump switches on the panels, no timer, no key switch, and no e-stop button.
Designed as a Nano Brewery / Pilot Brewery, this system features 45 Gallon Kettles and will brew a true 1 bbl (31.5
gallon) batch. Featuring two stainless pumps and all 1.5"" tri-clover connections, this brewery has found its niche as an
economical option for both brew pubs and garage fanatics.
Electric brewing is silent, economical, and safe for indoor use. Their electric systems include a full
featured control panel that precisely controls heat to your HLT and Boil kettles, and
allows you to monitor the temps of all 3 kettles right on the panel. The panels also
include a digital brewing timer/alarm and pump control switches. On the brewery side
you will find all stainless steel elements mounted to the kettles with tri-clover fittings to
allow super easy removal for cleaning.
3-45 Gallon Stainless Steel Kettles (with lids)
4-5500 Watt Elements
1-50 amp Electric Panel (with digital temp and pump control)
2-Stainless Steel False Bottoms
2-Stainless Steel Pumps (with remote On/Off switch)
3-Thru Wall Return Fittings
All SS Tri-clover Fittings & Silicone Tubing
Complete Owners Manual (with 1 year limited warranty)
Electric Panel Features:
Wall Mounted all stainless steel control panel
6’ (4 wire) power supply cable with plug
3 Digital PID Controllers for setting and monitoring your process temps
1 Multi Event Brewing Timer with Alarm
2 On/Off Switches for pumps
2-4 Stainless steel 4500-5500 Watt elements (depending on model)
3 Temperature probes with quick disconnect cables
Key style power switch for secure storage
Locking mushroom button stops all power to elements and pumps
Safety Interlock Relay disables system if any switch (pump or element) is on during power-up
Displays temperature in either Fahrenheit or Celsius (user selectable)
Welded in tri-clover element adapters allow for easy element removal
Power Supply Options/Requirements:
All Electric – 240 VAC - 60 Amp GFCI
Pump(s) - 110-120 VAC (50-60Hz) – 220v pumps available for international
Kettles (45 Gallon) – 24” diameter x 24” high
Now Included with the Electric Alpha Ruby Systems:
The Alpha Ruby electric systems now offer the ability to simultaneously heat the HLT and BOIL kettles at 50%
power. Each of these kettles has (2) elements in the kettle. Our new upgraded panels now allow you to run 2 elements
in either, or 1 element in both (100% HLT, 100% Boil, or 50/50) with a convenient selector switch.
The biggest benefit of this is time savings, as this allows you to begin preheating
your boil runoff while still
maintaining your HLT temp. This will allow you to boil almost immediately upon hitting your target runoff volume
Also included, the HERMS System:
HERMS - (Heat Exchange Recirculating Mash System)
The HERMS System is used to maintain mash temperatures and perform step mashes without direct fired heat. The HERMS coil offers a 1/2"" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun. The coil is factory installed only and pressure tested before it ships.
The HERMS system will include:
50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)
There are many ways to make this system your own by choosing all or only the options you want, please take a look at these options and select the one's that fit your style of brewing.
Optional Sight Gauge
Now you can get a sight gauge installed on your Boil Kettle or HLT.
Please see the options.
Optional Whirlpool Arm
If you would like a whirlpool arm assembly added to your boil kettle please see the options.
3 piece ball valve w/tri-clamp connection.
Optional Upgrade to 50 Gallon Kettles
Now you can get 50 gallon pots with the Alpha, this will replace the 45 gallon pots. Please select which kettles you would like to upgrade to 50 gallons. Please see options.
Optional Plate Chiller Package:
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6"" x 14"" 300 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless triclover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing. Please see options.