Already have kettles? Buy one of their signature bent tube stainless steel frames like the Alpha 1 Barrel. These frames include burners, valves, regulator, and pump(s) with 1/2" stainless outflow valves.
Frame Only Includes:
1-Frame - Welded Stainless Steel Construction
3-10" Cast Iron Burners (w/gas manifold & regulator)
2-Stainless Steel Pumps (with outlet valves and key fob remotes)
Complete Owners Manual (with 1 year limited warranty)
Alpha Ruby Frame Dimensions:
82.5” wide x 32” deep x 18.5” high
Maximum Kettle Size:
Max Kettle Gallons – 55 per kettle
Max Kettle Height – n/a
Max Kettle Width – 24"
Power Supply Options/Requirements:
Propane – Standard US cylinder (regulator included with system)
Digital Control Option (gas systems only) – 110-120 VAC (50-60Hz) – 220v conversion available for international
Pump(s) - 110-120 VAC (50-60Hz) – 220v pumps available for international
Optional Digital Control Package:
Ruby Street now has designed their own Digital Controller that works with or with out a HERMS System. Made from the highest quality components available right here in the USA!
Digital Controller Option will include:
Digital Control Panel and Bracket (1)
Sensor Cables (2)
Ignition Coil Box (1)
Solenoid Valves (3)
Temperature Sensors (3)
Burner Electrodes (3)
With the digital control package we recommend adding the HERMS option to fully utilize the mash temperature control feature.
Optional Plate Chiller Package
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Stainless steel bracket
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
· Can be sold and shipped with Ruby Street systems and frames.
If you are not getting the best flame possible out of your propane burner, you may have triggered a safety valve in the propane regulator body. This occurs when the gas flow through the regulator is too great. You will need to disconnect the regulator from your propane tank to release the safety valve. While connecting your regulator to your propane tank, it is very important that the propane tank and all needle valves are completely closed. Once the regulator is correctly connected to your closed tank, open the propane tank slowly to allow gas to flow into the regulator. You can now open the needle valve enough to ignite your burner. Once the burner is lit you can slowly open the needle valve until you reach the desired flame intensity.