Barley Crusher Grain Mill (15 lb Hopper)

Works well. Easily adjustable. Quality build. Base is made of particle board but seems fine for now. Good price for the 15lb hopper!

I mounted it on a table using a mounted drill and it is working great.

Headline says it all. Phenomenal mill. Knurling is just starting to show signs of ware. If you keep it lubed with a VERY small amount of mineral oil will last pretty much forever until the knurling wears out. I keep mine spaced to about .031 using a feeler gauge. I average about 86% efficiency fly sparging. If you are prone to stuck sparges would recommend increasing to about .035-37.

I researched the heck out of grain crushers, and a friend turned me onto this one. Certainly the best value I found out there, and it works marvelously. Great product.

Our efficiency has gone way up, even with the manual crank (I don't have a powerful enough screw driver yet...) it only takes minutes and it's paying for itself in efficiency and bulk grain. Very sturdy.

I used this several times already and everything is great when it wants to work. The rollers don't grab the grain and one does not spin unless it grabs the grain. So I had to prime it with a little push down into the grain a few times and even had to take it apart once to get it to go. Not sure why this thing does not work without such, but eventually it works with some help.

This was a great purchase. I've cracked 40 pounds of barley with it on the factory setting, IPAs and Porters, and the brews came out just fine. It will pay for itself in no time. It fits very well on a 5-gallon bucket, which keeps the dust down. It comes with a hand crank you can attach, but I just use a variable speed drill. Definitely recommend it.

Just used my Barley Crusher for my first batch since I received it and I could not be more satisfied with it and the results. My local homebrew store''s crusher was not set properly and they would not dial it in any finer. So the coarse crush had dropped my mash efficiencies into the low 71-73% range. Today I hit 84.1% which is right in line with what I hit on a friends Barley Crusher. Both set at the factory settings. Yes I am happy, yes I am satisfied and will order from Adventures in Homebrewing again.

Your grain mill exceeded my expectations. I''m very happy that I bought it - the price quality and delivery were also very good.

The grinder works great and my 12 year old son ground all the grain this past weekend to make this IPA, I''ll be ordering some grain soon to make an Oktoberfest. Thanks and hopefully someday when I''m in your area I''ll get the chance to stop in and check out your store.