Q: Will this work with a Bayou Classic KBA6 burner?
A: Blichmann uses a thread size similar to the bayou classic orifice, so these should work with this burner, so long as the orifice is the same threading
Q: I would like to have output control at the burner vs. tank. Can the needle valve (WITHOUT the orifice fitting) be used on a high pressure LP outdoor burner?
A: This conversion kit is designed to work on a LP burner, to switch the gas feed over to Natural gas. Without the proper orifice in place, you will not get the proper flame which can cause a severe drop in BTU output
Q: Do you need one of these for each burner or can one be installed on the gas pipe and then a Siamese connection be added?
A: You would need one of these items for each burner. Thanks!
Q: Is this available with high pressure LPG (100,000btu)orifice? What is fitting on output side?
A: This item is only available for use with Natural Gas, using the provided orifice. This unit does not have an output side. The output female fitting is a 3/8" flare.
Q: What size is the gas-in fitting on the needle valve in the Blichmann Natural Gas Converter kit?
A: Standard 3/8'' flared fitting.