Beer Brewing and Kegging Supplies • 1-313-277-2739 • Serving Homebrewers Since 1999

USA, Canada, Global Shipping

$16 Off Orders Over $100! View Terms

Home>Brewing Equipment>Boiling Equipment>Brewing Thermometers

Blichmann WELDLESS brewmometer (F) Scale

Dial shows temperatures and more!

Blichmann WELDLESS brewmometer (F) Scale

Item Number:54-3688

AVERAGE RATING
review

2 Review(s)

Your Price:$32.99

Quantity

Reward Points 33 points will be rewarded to you when you buy this item.

Questions about this item? Ask here.

(See 10 Questions)

Description
CUSTOMER REVIEWS
Questions and Answers

Guaranteed lowest pricing. If you find this item for less we will price match.

Unique made-for-brewing dial face guides the brewer through the brewing process. Arrows indicate ideal process temps. Large graduations and custom temp range make the BrewMometer the most accurate thermometer of it's type on the market.

Blichmann Weldless Brewmometer

Purchased & installed the thermometer onto my 8 gallon stainless brew kettle. Very solid construction, easy to read dial, and superior quality compared to other similar thermometers, that sell in $15.00-$20.00 range. Love the fact I only had to drill a 1/2" diameter hole to install it too! Packed well, and shipped fast. 5 star all the way.

Reviewed by: Larry Sande on 2/11/2016

Blichmann Brewmometer

Purchased and installed the Blichmann Brewmometer in my brew pot. Easy installation, and does not leak. The probe is short enough that it does not interfere with my wort chiller. The face has different temperatures highlighted for doughing in, protein rest, lauter, etc. I find this feature very handy. As with all Blichmann products, this brewmometer looks to be of top quality and built for a lifetime of brewing.

Reviewed by: Richard Armour on 6/9/2015

Q: This should work on an 10 Gallon SS BrewTech kettle?

Asked by: chris - 11/17/2017

A: The weldless thermometer needs a port drilled into the sidewall of the kettle as it uses a lock nut and washer to be held in placer and is not threaded. It can be used on any kettle that the opening is appropriate for the thread on the thermometer to pass through and have the lock nut secure it on the inside

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (11/17/2017)

Q: Hello, I was wondering what size hole is required to attach this to the brew kettle? Thanks.

Asked by: Larry - 2/2/2016

A: Drill a 3/16 pilot hole and then enlarge it to ½” (+0.015, - 0.010) using a “step drill”.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Desiree (2/3/2016)

Q: Will this work accurately installed on keggle?

Asked by: Amish - 9/28/2015

A: Absolutely, this can be installed in the wall of a keggle.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Carson (10/6/2015)

Q: Would this be a good thermometer set up to install on a Rubbermaid 10 gallon cooler?

Asked by: Andrejs Reskevics - 2/25/2015

A: You could definitely use this, but we do not recommend that you drill holes through the walls of coolers. Once you damage the integrity of the walls, you may loose heat or see leaking.

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Carson (2/26/2015)

Q: Is the probe sufficiently long for all mashes? It seems that maybe with such a short probe, it might not work too well with a thick mash.

Asked by: Mark - 1/27/2015

A: These are the same Brewmometers which Blichmann Boilermaker pots come standard with, which of course make great mash tuns. I think these are a great option for mashing, and are some of the highest quality thermometers available.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Carson (1/27/2015)

Q: How long is the probe?

Asked by: Michael Jones - 12/10/2014

A: These thermometers have 2" probes. Thanks!

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Carson (12/15/2014)

Q: Does this thermometer screw into a standard 1/2"NPT fitting?

Asked by: James Mitchell - 11/28/2014

A: This thermometer will not screw into a 1/2" NPT fitting.

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Robert (12/2/2014)