Chrome Plated Elbow Shank

1 Review(s) Send your review

Your Price: $15.99

Questions? Ask here.

Item Number: 40-1882

Availability: In stock

Quantity

16 points will be rewarded to you when you buy this item.

Description
PRODUCT REVIEWS
Questions and Answers

Chrome Plated Elbow Shank

Chrome Plated elbow shank with 3/16" bore and bent tube. Perfect for towers or when a tight fit is needed. Barbed elbow will fit 3/16" or 1/4" I.D. vinyl tubing.

Q: Will this fit a krome c257 stout faucet?

Asked by: Ryan Cutright - 2/25/2019

A: This would work well with the c257 nitro.stout faucet from krome

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (2/26/2019)

Q: Do you have any other shanks with a 90 degree that are longer for use in a dual tap tower installation? The problem is that these may overlap each other an not allow both to fit side by side.

Asked by: Ryan - 11/14/2018

A: At this time this would be the currently length of any tower shanks we have to offer. These are used on our dual tap tower applications with the barbs turned to either side to avoid them meeting in the middle for installation purposes

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (11/14/2018)

Q: Anyone using this in a 2.5" diameter tower?

Asked by: Pierce Leonberger - 12/5/2017

A: The part is designed with a 3" tower in mind, but so long as the inside of the tower yor workign with has enough clearance for the tail piece barb and tubing to fit correctly it could be used on a 2.5" in some cases

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (12/5/2017)

Q: Will this shank work on a T tower or other flat surface?

Asked by: Justin T - 6/8/2017

A: the collar on the shank is curved to match up with a cylindrical tower. It can be tightened down to a flat surface but may show gaps

Was this answer helpful? 0 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (6/9/2017)

Q: Hello, will this work with a Perlic SS650??

Asked by: Bernardo Quaranta - 4/20/2017

A: Yes, the coupling nut on the front of the shank is a standard size and will fit all Perlick model faucets

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (4/21/2017)

Q: Item Number:40-1882 How long is it? can it accept a wall of 1/4" on the tower. I assume it's a 3" tower dia, yes? Thanks

Asked by: Pat - 3/6/2017

A: 1/4" would leave you with very few threads on the inside but it should be able to connect to a tower with a 1/4" wall. The towers typically used with this product are 3" diameter

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (3/6/2017)

Q: Do you plan to offer these shanks for sale again? If so, about when?

Asked by: Ed Harrison - 9/5/2016

A: We have received these in from our supplier and they are in stock at this time. Cheers!

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Tim (11/21/2016)

Q: What Krome model number is this item? I have an old 3 inch dual tower with 7/8 inch openings and I purchased two that have these dimensions - Length 1-7/8" -Bore inner diameter - 3/16" - Thread - 7/8"-14 (5/8" BSP) and do not fit into the openings. Thank you.

Asked by: Terry Gates - 7/16/2016

A: The Chrome product # is c 331. The openings on 3" towers will vary depending on the manufacturer, and the opening may need to be modified to accommodate certain shanks.

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (7/29/2016)

Q: I would like to purchase 2 of these short shanks in Brass. Do you have these in Brass? Many thanks Steve Kennedy

Asked by: Steve Kennedy - 1/15/2016

A: We have them chrome plated and stainless steel.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Desiree (1/19/2016)

Q: What size is the hex nut on this item?

Asked by: Tahdi - 8/22/2015

A: The shank lock nut has a 5/8" BSP thread.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Robert (8/24/2015)

Q: Are these Krome brand?

Asked by: Brian - 7/11/2015

A: These are Krome Dispense brand shanks.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Robert (7/13/2015)

Q: What size hole would I drill for this?

Asked by: Will - 1/29/2015

A: Shanks require a 7/8" hole for installation.

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Carson (1/29/2015)

Q: Will this fit onto a 2.5" tower?

Asked by: Adam - 1/8/2015

A: This item is for a 3" standard bar grade tower.

Was this answer helpful? 1 of 2 Guest(s) found this Answer helpful.

Answer provided by: Carson (1/9/2015)

Q: What size beer lines should I use with this?

Asked by: Kyle Malone - 4/13/2014

A: A 3/16" ID beer line works with this shank.

Was this answer helpful? 3 of 3 Guest(s) found this Answer helpful.

Answer provided by: Robert (4/14/2014)

Q: What is the length beyond the bracket? In other words will two of these fit across from each other in the 3" tower(or what is the minimum size)?

Asked by: Thomas Timpf - 2/26/2014

A: The length of the shank that would be in the tower is 1 3/8".

Was this answer helpful? 3 of 3 Guest(s) found this Answer helpful.

Answer provided by: Robert (2/27/2014)

Q: What is the overall length on this item?

Asked by: Stan - 2/19/2014

A: The length of the shank is 3 1/4" and the height is 2 3/4".

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Robert (2/26/2014)

Q: Will this part fit a one to three tower extension tube where there is already one shank like this in place in the extension tube?

Asked by: Dave Goldgar - 2/4/2014

A: Yes. This is the same shank that comes with the extension/s.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Chris (2/5/2014)

Questions? Ask here.

24" Wall Shank Assembly

$34.99

In stock

(1)

Buy

Faucet Shank Assembly - Chrome Plated

$29.99

In stock

(1)

Select Options

4 1/2" Jockey Box Stainless Steel Wall Coupling with 3/8" Bore

$24.99

In stock

Buy

5 1/8" Shank for Faucet with 3/16" Inside Diameter

~~$16.99~~ $12.99

In stock

(1)

Select Options

Go to Top of Page

Chrome Plated Elbow Shank

Q: Will this fit a krome c257 stout faucet?

Q: Do you have any other shanks with a 90 degree that are longer for use in a dual tap tower installation? The problem is that these may overlap each other an not allow both to fit side by side.

Q: Anyone using this in a 2.5" diameter tower?

Q: Will this shank work on a T tower or other flat surface?

Q: Hello, will this work with a Perlic SS650??

Q: Item Number:40-1882 How long is it? can it accept a wall of 1/4" on the tower. I assume it's a 3" tower dia, yes? Thanks

Q: Do you plan to offer these shanks for sale again? If so, about when?

Q: What Krome model number is this item? I have an old 3 inch dual tower with 7/8 inch openings and I purchased two that have these dimensions - Length 1-7/8" -Bore inner diameter - 3/16" - Thread - 7/8"-14 (5/8" BSP) and do not fit into the openings. Thank you.

Q: I would like to purchase 2 of these short shanks in Brass. Do you have these in Brass? Many thanks Steve Kennedy

Q: What size is the hex nut on this item?

Q: Are these Krome brand?

Q: What size hole would I drill for this?

Q: Will this fit onto a 2.5" tower?

Q: What size beer lines should I use with this?

Q: What is the length beyond the bracket? In other words will two of these fit across from each other in the 3" tower(or what is the minimum size)?

Q: What is the overall length on this item?

Q: Will this part fit a one to three tower extension tube where there is already one shank like this in place in the extension tube?

Guests Also Bought...