Q: As co2 is going to the bottom of the keg to dispense the liquid would this not carbonate the beverage?
A: It would take quite a while for the beverage to carbonate at serving pressure without force carbonating it.
Q: Can this keg be used with nitrogen and CO2?
A: the kegs can be used with co2, nitrogen or argon
Q: Does this work with the standard CO2 that is used for beer kegs? Do I need any special adaptors to hook it up?
A: This will work with co2 or nitrogen for dispensing beer/wine/cider/coffee/cocktails etc. you would just need the proper gas feed in and liquid feed out ball lock disconnects on your lines to connect to the keg when in use
Q: Connection for the craft cocktail on Draft: Will this connect to a standard draft line without additional adapters?
A: the connections on the kegs are not standard commercial connections. An adapter kit can be purchased under item ID 99-5858
Q: What brand of keg is this?
A: These are old ale Wholesale Brand KEgs
Q: What exact connectors do i need for gas and dispense? Please give me model numbers / links from your site so i can buy it all at once
A: 99-5858 this part ID would give you the needed add-ons to complete conversion and an existing draft set up to tap the kegs
Q: Can liquid tubes be ordered to retrofit existing kegs?
A: For new stock tubes, the only ones we currently offer are only guaranteed to fit Old Ale Wholesale Branded kegs. We do sell replacement used tubes for Ball locks kegs under the Kegging Section>repair/replacement parts. The tubeso n the kegs will vary by manufacturer so narrowing down the length, curvature and if the flange on the tube as the small tabs or "Ears" or not will need to be know to pick which tube your keg is in need of
Q: APPROX SHIPPING COST FOR 2 OF THE 5 GALLON COCKTAIL KEGS TO VANCOUVER, BC
A: We would need the postal code to claculate this. The item can be added into a cart on the site, and using the shipping calcultor, changed to your Country, state/provice and potal code, will calculate out your rates. Any shipping totals show will be transit fees only and not include duties and taxes owed before final delivery by the end user
Q: Does this use a american Coupler? or WHat type is is?
A: these use soda style quick disconnect and do not currently accept a Sanke or american style coupler-the proper disconnect set needed is under part #60-2639
Q: When will this item be back in stock, and is there anything else that I could buy that is comparable? We are only serving cocktails on draft and have been using a 5 gal cornelius pin drop keg.
A: These will be available again in Early May on a vendor shipment we are wiatiing to recevie(2018)
Q: Is there any chance of buying bulk on this item for a better price?
A: The cost of the converted cocktal kegs is actually the same as our wholesale cost as well so this would be the current pricing for a small or large bulk order
Q: When the ball lock coupler is attached...what is the total height including this corn keg?
I have an under counter kegerator and have limitations of inside height.
A: The disconnect and tubing add a bout 2-3" in height above the handle so 27-28" clearance minimum is needed
Q: Is this keg equipped for the D-system couplers?
A: This keg is setup with ball lock fittings. If you need help converting your system over to ball lock, let us know and we will be able to assist you with that.
Q: So... Does this keg have a steel line descending down from the gas post, so that the gas disperses from the bottom?
Can you get more of these in stock?
A: These kegs have been assembled with 2 liquid tubes that reach all the way to the bottom of the keg so as you pour your cocktails it releases co2 to the bottom to help keep the cocktail mixed. They are currently not listed as not for sale so we do have them.