Q: Ok for corn
A: We do not recommend the mills we sell for cracking corn
Q: Is there a board that fits the bottom?
A: The mill will ship with a metal base designed to fit over a 5 gallon bucket. You could remove that and create a board or wooden base using the holes marked for the screws on the metal base as a template
Q: My mill technically works, but it is taking about 45 minutes to mill 10 pounds of grain. I don't know exactly what the problem is, but it seems the grain won't feed to the rollers if the drill is going with any speed at all. Is there a fix for this?
A: checking to make sure the passive roller not attached to the drive shaft, is moving freely with no grain in the mill one be one thing to check. We recommend using a .034-.036" gap setting for the best crush on most grains. If running a finer crush and the drill speed is moving too fast, it will allow the kernels to sit on top of the rollers and will not pull through as well as a slightly wider setting with a slower speed
Q: Will this grind halfed dried peas and other mix grains to a pig or chicken food consistency?
A: this mill is designed for use with malted wheat, rye and barley. We do not recommend its use for whole kernel or cracked corn or large kernel items
Q: Do you have any mills that will work for corn?
A: We do not currently carry mills suited for milling corn
Q: Hi, I see the crop duster is back in stock. Can you give me an ETA on my previous order of the mill? Order No. 20-681236.
A: the mills just arrived in to begin shipping-tracking information will be sent over to the Email address provided to follow the delivery once your mill heads out in the coming days
Q: I just received my crop duster but I seem to be missing the 2 screws that attach the bottom braces. Do you happen to know what size screws they use?
A: sorry to hear the screws were missed! SS M5-08 x 3/4" long, you can get these at Lowes and Home depot
Q: I ordered in may are you going to be shipping soon
A: the mills will be shipping within the next week or so to keep an eye out for the tracking update from the 2020 preorders!(Aug. 2020)
Q: Can you grind corn and malted barley with this mill?
A: this can be used for milling malted barley, malted wheat and rye, but is not recommenced for use with corn
Q: There are conflicting answers to the question about whether the Crop Duster has case hardened steel rollers. Multiple answers state that this is true and that the roller mechanism is the same as in the Cereal Killer, however the most recent answer from 7/18/20 now says that the Crop Duster does NOT have case hardened rollers and calls them just "304 Stainless steel". Can you please clarify this and confirm that the Crop Duster has been down-graded, no longer shipping with case hardened rollers as indicated in prior answers? Also, it would be helpful if the prior answers were updated so that they are not contradictory to prevent further confusion.
A: This mill would not have case hardened rollers. They are made from 304 stainless steel. All previously mentioned questions and the Description of the product are now current for what would be shipping as of July 2020
Q: This this have bearings or brushings?
A: the mills are using bearings
Q: Is it really going to be in late July or in August now
A: The mills should be arriving to ship by late July(2020)
Q: Any update on expected ship date for pre-orders of the Crop Duster Grain Mill?
A: The mills were processed and shipped from the manufacturer and we are just awaiting the receipt of the mills later in the month to being shipping. Some manufacturing slowdowns due to the COVID situation did delay the processing timeline a bit but will be fulfilling all of the preorders as soon as the mills are available
Q: I pre-ordered a crop duster earlier this month. Any update on expected shipping schedule?
A: the grain mills are expected in over the next week or so to begin shipping. We do apologize the Preorder timeline was pushed back by a few weeks from the delivery by the manufacturer-tracking will be emailed over to follow delivery once the mills are on hand to ship
Q: Good day. Do you ship to Canada?
A: we do ship internationally. You can get a quote for this through the site, prior to committing the order.
With items in your cart, click through to the last checkout page. In the right column, scan down and choose the appropriate, city/state/province/country etc...Refresh the shipping rates and you will have quotes from both UPS and USPS.
Q: It's late June is it shipping soon?
A: We should be receiving in the mills to ship in the next week or so to being processing shipments
Q: Con you grind corn with this mill
A: This can be used for grinding rye barley and wheat but is not advised for mill or cracking whole kernal or cracked corn
Q: Exactly when will this ship
A: we are expecting these to be restocked to ship sometime in June 2020
Q: When will the mill be back in stock
A: we expect to have these restocked in Summer of 2020
Q: Will you be getting more of these in stock?
A: the mills will be restocked towards the end of spring /early summer of 2020 for when we expect them to be available again