Q: Is there a slot in the thumb-screw to use a small phillips or straight screwdriver? It seems like it would be very difficult to adjust in teensy increments needed for serving pressure otherwise.
A: The regulator currently ships with just the thumb screw adjustment but does not currently have a notch for screwdriver adjustments
Q: Could it work with a 16 gr threaded CO2 Cartridge?
A: This unit will work with most 5/8" threaded CO2 bulbs. 16 gram bulbs typically use a 3/8" thread and will not fit.
Q: With the adaptor you sell on your site, can you also attach a paintball co2 tank to this regulator?
A: This regulator is designed to be used with one-time use CO2 cartridges, and cannot be adapted to work with a paintball CO2 tank
Q: Will one 75 gram cartridge be enough for a 5 gallon corny?
A: Yes. The amount of CO2 needed to dispense can vary, but you should be able to dispense up to two 5 gallon corny kegs with one 74g cartridge.
Q: Can this unit work with Nitro Chargers as well? I've seen a few around the internet that claim to work with Nitro too and I'm really interested in this kind of setup for cold brew coffee or bringing nitro beers to parties and such.
A: Nitrogen used a complete different regulator and tank than co2 does.
Q: I am curious, does it regulate flow or pressure?
A: This regulator regulates pressure.
Q: The regulator looks like it is adjusted from 0-1500 psi. Is there an easy reference to meter out a small serving PSI around 5-10 psi?
A: Unfortunately this gauge on the regulator does have a inaccurate gauge, due to the fact that each increment is 100psi. Your only option with using this for serving would be to have the beer carbonated and stored at a proper PSI, and then barely turning this regulator on to put enough gas in the keg to continue to push beer.
Q: Do you have a regulator that fits onto a hambleton bard co2 cylinder or sodastream cylinder?
A: We do have an adapter in the works for these particular cylinders allowing you to use your existing regulator, but unfortunately we do not have anything available yet.