Beer Brewing and Kegging Supplies • 1-313-277-2739 • Serving Homebrewers Since 1999
0 item(s)
$0.00
USA, Canada, Global Shipping
Orifice for Single Natural Gas Burner

Orifice for Single Natural Gas Burner

Item Number:99-1677
AVERAGE RATING
review
4
0
5
Your Price:$7.99
Reward Points 8 points will be rewarded to you when you buy this item.
Natural Gas Orifice
Orifice only for natural gas. It will fit most burners with an 1/8" NPT it also comes with a 3/8" Female Flare. This will also fit our standard 14" AIH burners.
5 Stars
Drill it out one bit size
For low pressure city gas I could barely get it to boil. I carefully drilled it out one bit size and it now works great. The hole in the orifice is pressed in so I drilled very slow with oil and it worked fine. Easy fix for a great product.
Reviewed by:  on 8/1/2016
5/5
3 Stars
Issues with NG pressure
I'm going to go with 3 stars, NOT because there is ANYTHING wrong with the orifice, but more importantly so people read this review. CHECK YOUR PRESSURE! I purchased this for city Natural Gas (Low Pressure) and cannot get the burner to burn at any usable rate. I have a 1/2" feed & host all the way to a ball valve. I reduce after the valve point to 3/8" to tie into the BG10 burner. No luck! :(
Reviewed by:  on 11/10/2015
3/5
5 Stars
Worked for my BG12
I used this to convert my BG12 burner to NG, (I was using Low-pressure Propane) and it works just fine. I use it indoors and I get a very good blue flame, even at higher output. I currently control the flow at the ball valve of my gas outlet, but will likely add an inline needle valve closer to the burner. I used a couple other brass pieces to convert to NPT, which allowed me to add a QD. It was nice to be able to find an NG orifice with 1/8" NPT.
Reviewed by:  on 1/20/2015
5/5

Customers Also Bought...