Potassium Metabisulphite is a sanitizer. Use 2 ounce per gallon of water. Antioxidant and bactericide - use 2/3 teaspoon to 5 gallons. Dissolve sulphite in warm water before adding. Potassium Metabisulphite 1 lb.
Use 1/4 tsp. for 6 gallons. Potassium metabisulphite comes with just about every wine kit we sell and is used as an additive even in private and commercial wineries.
What does it do? What is it for? Is it safe?
Potassium Metabisulphite is an antioxidant. It slows down the aging and oxidation of wine by removing free oxygen suspended in the wine. Oxygen is both harmful and beneficial to wine. It is harmful in large quantities because it rapidly accelerates the aging process. However, wine with too little oxygen your hard work can develop off flavors.
Potassium metabisulphite is often called a stabilizer because it serves to prevent spoilage and further fermentation by removing oxygen. However, adding potassium metabisulphite preserves the flavor and color of a wine. An oxidized wine can turn red wines orange and eventually a very unappealing brown. White wines will also turn brown with too much oxygen.
This additive is available in a powdered form as pictured here as well as in tablets called campden tablets.
Potassium metabisulphite may also be used as a sanitizing agent due to its antioxidant properties. When you dissolve Potassium Metabisulphite in water it forms three different compounds, sulfur dioxide, bisulfite, and sulfite. Each of these is able to bond with free oxygen floating around in wine. When this happens the free oxygen is no longer available to be consumed by micro-organisms. The removal of oxygen chokes off most micro-organisms and will prevent them from reproducing. It does not, however, stop a fermentation. Yeast produces alcohol only when forced to live without oxygen but it does go on living.
By adding potassium metabisulphite after you’ve stopped fermentation completely you can then back sweeten a wine with little risk of rekindling the fermentation of newly added sugar. Sodium Metabisulphite
can be used interchangeably with potassium metabisulphite. While they both have very similar chemical makeups the difference is that potassium metabisulphite leaves potassium behind and sodium metabisulphite leaves sodium behind. Potassium occurs naturally in grapes and is essential to their growth. So adding a bit more potassium to the mix isn’t going to hurt anything. There’s already some in your wine. Sodium on the other hand is not something we want to add to our wine, the left over Sodium in your wine will taste salty.
A few things to know about potassium metabisulphite. The compounds it creates can be hazardous to your health in large quantities. SO2 is a toxic gas. Be careful not to breath the dust in or gas that is released when dissolving in water. After adding potassium metabisulphite to your wine, give it time to bond with the wine before tasting any samples. Potassium metabisulphite is a controlled substance in food and wine preservation.
Caution : Please use caution when adding SO2. Once it’s been added it is not easy to remove. The only remedy is to give it lots of time to dissipate. Chemically there isn’t much you can do.
Also, potassium metabisulphite can be very agitating to your eyes and respiratory system. Handle the powder carefully and do not let the dust into your eyes or breathe it in.