Robobrew V3.1.1 All Grain Brewing System with Pump 9.25 Gallons (220 V)
NEWER, MORE POWERFUL VERSION! The all new Version 3.1.1 Robobrew boasts an incredible 2400 W of heating power and features Automatic Step Mashing with 6 programmable stages. Each of the 6 stages can be programmed to individual temperatures and durations to precisely control your step mash. Not using that many stages, simply set your time to 00:00 and the Robobrew will automatically skip to the next step. This more powerful Robobrew requires a 220 volt plug.
The V3.1.1 unit features an upgraded main circuit board that changes how
the automatic step mashing functions. Now when moving from step to
step, the timer for each step will not begin counting down until the
programmed temperature is reached. This means more accurate mash
schedules than ever before! The new board also introduces boil addition
timers so you'll never miss the mark for hop additions.
The easiest way to start all grain brewing today! The Robobrew All Grain Brewing System is a 9.25 gallon (35 L) capacity electric brewing system that makes it simple for homebrewers to step up to all grain brewing without a mountain of equipment and costs. This system includes a stainless steel mash tun/boil kettle, recirculation arm and pump, water resistant control panel, grain basket/malt pipe, spigot, and immersion wort chiller.
The Robobrew features dual heating elements, one 1900 watt and one 500 watt, to give you full control over the heating process. Individual switches control the elements, allowing you to fire both elements to quickly heat your water to mash temperature or bring your wort to a boil, or just use one element when you want to maintain a constant temperature. The on-board water resistant control panel allows you to set and monitor temperatures. The delayed start feature allows you to set your temp (up to 23 hours in advance) and have your brewing water hot and ready for when you wake up or return home from work.
A built-in magnetic drive pump recirculates your wort through the recirculation arm. Make sure to add on some high temp silicone tubing to gain even more control over the recirculation process; it also serves as a great transfer/drain tube for the include stainless steel ball valve. Recirculating your wort will increase your efficiency and lead to better beers with greater yields.
A stainless steel malt pipe makes converting from a mash tun to a boil kettle super simple. The easy to left handles on the malt pipe lets you raise the pipe above the Robobrew system, with bottom tabs to stabilize the malt pipe while allowing your wort to properly drain. The interior of the Robobrew features etched gallon/liter markings and has a 1/2" stainless steel ball valve to easily drain and transfer your brew. Once your done boiling, the included immersion wort chiller will bring your brew back down to pitching temperature in no time!
Robobrew All Grain Brewing System Features:
-Dual Heating Elements (1900W & 500W)
-Automatic Step Mashing with 6 programmable stages
-Magnetic Drive Pump
-Stainless Steel Malt Pipe
-Stainless Steel 1/2" Ball Valve
-Digital Temperature Controller
-Immersion Wort Chiller
-Stainless Steel Construction
-9 Gallon Capacity (35 L)
-220 volt plug
-Dimensions: 21.625" H (32.75" with Recirculation Arm) x 12.5" D
**Manual References an element from a different market. This unit comes with two heating elements for a total of 2400 watts.**
*Please Note: This item is drop shipped from the vendor. Please allow extra time for delivery.