Optional Sight Gauge
Now you can get a sight gauge installed on your Boil Kettle or HLT.
Please see the options.
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless tri-clover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing.
Thermometers on the Mash an HLT are already included, if you would like a thermometer installed in the Boil kettle, please see the options.
Optional Whirlpool Arm w/Valve
If you would like a whirlpool arm assembly added to your Boil kettle please see the options.
3 piece ball valve w/tri-clamp connection.
Optional Plate Chiller Package
Ruby Street Has a complete plate chiller package that will be installed on your Ruby Street frame.
Plate chiller package includes:
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Stainless steel bracket
· Mounting hardware
· Tri-Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
· Can be sold and shipped with Ruby Street systems and frames
Optional 50 Foot Immersion Chiller
50 ft. Immersion Chiller is coiled with 3/8" copper tubing and fitted with quality brass garden hose connectors.
If you would like to add a 50' Immersion Chiller please see the options section.
Optional Digital Control Package:
Ruby Street now has designed their own Digital controller for their system. Made from the highest quality components available right here in the USA!
Digital Controller Package Option will include:
Digital Control Panel and Bracket (1)
Sensor Cables (2)
Ignition Coil Box (1)
Solenoid Valves (3)
Temperature Sensors (3)
Burner Electrodes (3)
With the digital control package we recommend adding the HERMS option to fully utilize the mash temperature control feature.
For more information on the Digital Controller please click on the link below for the owners Manual.
Optional HERMS Conversion Kit:
HERMS - (heat exchange recirculating mash system)
Many brewers are choosing HERMS as an option to maintain mash temperatures and perform step mashes without direct fired heat. Our HERMS coil option offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun.
The HERMS Conversion Kit for the Standard Ruby Street Brewery will include:
· 50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)
· Through wall return tri-clover fitting installed at the top of the mash tun with cork float return hose inside
· (1) additional 3’ hose with tri-clover fittings on both ends
· (1) additional tri-clover barb added to the end of the normally open 7’ hose
· (3) additional clamps
· (3) additional gaskets
(Recirculating Infusion Mash)
The ability to recirculate your mash is standard on Ruby Street Systems without the optional digital controller system. Controlling the temps on your mash can be done manually, but with the digital controller these temps are controlled, firing your burner automatically, and is highly recommended.
Many Brewers are choosing the option to maintain mash temperatures and perform step mashes by applying direct heat to the mash tun from a burner, either fueled by propane or natural gas. The pump keeps the wort recirculating fast enough so that there are no worries about scorching the wort. The pump runs continuously during the mash and the heat, the flame is cycled on and off by a Digital Controller to maintain the set temperature in the mash. Ruby Street also offers their own newly designed Digital Controller, please see the options. You can also add a through wall fitting for recirculating the HLT or boil kettle.
Thru-Wall Return Fitting Option
Many brewers prefer to re-circulate and/or sparge with the kettle lids on. The thru-wall return fitting option makes this process easy. This fitting is generally mounted at the top of the kettle just below the rim.
Thru-wall fittings mounted in HLT or Boil kettles will include a silicone tube that reaches the bottom of the kettle to prevent splashing.
Already included is thru-wall fittings mounted in the Mash Tun and will include a cork float silicone sparging hose.
Please see the options for these options.
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6" x 14" 300 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.