The Ruby Street Natural Gas 15 Gallon Brewing System
Now Offering Free Shipping!
Lower 48 States Only
Because these are built to order please allow 4 weeks for delivery
The Ruby Street Brewery is a full featured high quality home beer brewing structure unlike anything else on the
market. Their signature bent tube frame powder coated in gloss red and loaded with solid stainless steel fittings and
kettles offers a unique blend of both form and function. Oh yeah, and large 10" pneumatic tires allow easy transport to
wherever your beer brewing obsession takes you!
Complete System Includes:
1-Frame - Welded Steel Construction (powder-coated)
3-15.5 Gallon Stainless Steel Kettles (with lids)
3-Cast Iron Burners (with gas manifold & regulator)
2--Stainless Steel False Bottoms
1-Stainless Steel Pump (with remote On/Off switch)
All SS Tri-clover Fittings & Silicone Tubing
Complete Owners Manual (with 1 year limited warranty)
Power Supply Options/Requirements:
Digital Control Option (gas systems only) – 110-120 VAC (50-60 Hz) – 220 v conversion available for international
Pump(s) - 110-120 VAC (50-60 Hz) – 220 v pumps available for international
Natural Gas – Pressure Requirement - 7” W.C. / Minimum Supply – 1”
System: 71.5” wide x 26” deep x 62” high – with kettles
Kettles: 16.5” wide x 18.5”high
Optional HERMS Conversion Kit:
HERMS - (Heat Exchange Recirculating Mash System)
Many brewers are choosing HERMS as an option to maintain mash temperatures and perform step mashes without direct fired heat. Our HERMS coil option offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun.
The HERMS Conversion Kit for the Standard Ruby Street Brewery will include:
· 50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)
· Through wall return tri-clover fitting installed at the top of the mash tun with cork float return hose inside
· (1) additional 3’ hose with tri-clover fittings on both ends
· (1) additional tri-clover barb added to the end of the normally open 7’ hose
· (3) additional clamps
· (3) additional gaskets
· Does Not include any thermometers (recommended for HLT and Mash, please see options)
(Recirculating Infusion Mash System)
The ability to recirculate your mash is standard on Ruby Street Systems without the optional digital controller system. Controlling the temps on your mash can be done manually, but with the digital controller these temps are controlled, firing your burner automatically, and is highly recommended.
Many Brewers are choosing the option to maintain mash temperatures and perform step mashes by applying direct heat to the mash tun from a burner, either fueled by propane or natural gas. The pump keeps the wort recirculating fast enough so that there are no worries about scorching the wort. The pump runs continuously during the mash and the heat, the flame is cycled on and off by a Digital Controller to maintain the set temperature in the mash. Ruby Street also offers their own newly designed Digital Controller, please see the options. You can also add a through wall fitting for recirculating the Mash, Boil or HLT.
Optional Thru-Wall Return Fitting
Many brewers prefer to re-circulate and/or sparge with the kettle lids on. The thru-wall return fitting option makes this process easy. This fitting is generally mounted at the top of the kettle just below the rim.
Thru-wall fittings mounted in HLT or Boil kettles will include a silicone tube that reaches the bottom of the kettle to prevent splashing.
Thru-wall fittings mounted in the Mash Tun will include a cork float silicone sparging hose.
Please see the options.
Does not include the Digital controller please see the option if you need to add this to your order.
Optional Digital Control Package:
Ruby Street now has designed their own Digital Controller that works on the HERMS System. Made from the highest quality components available right here in the USA!
Digital Controller Option will include:
- Digital Control Panel and Bracket (1)
- Sensor Cables (2)
- Ignition Coil Box (1)
- Solenoid Valves (3)
- Temperature Sensors (3)
- Burner Electrodes (3)
With the digital control package we recommend adding the HERMS option to fully utilize the mash temperature control feature.
For more information on the Digital Controller please click on the link below for the owners Manual.
Optional Plate Chiller Package
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Bracket to fit any of our frames powder coated to match
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
· Can be sold and shipped with Ruby Street systems and frames.
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6" x 14" 300 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.
Optional Domino Utility Shelf:
Need a place to set your beverages, spoons, refractometer, etc. while brewing? We now offer a removable accessory shelf that fits perfectly on our Ruby Street Brewery™ and Mega Ruby™ frames and systems.
Machined from high density plastic, this 10" x 15" shelf includes 4 recessed beverage spots and steel hardware powder coated in our signature red. Attached with a single steel pin, this shelf can be removed in seconds so it doesn't interfere with standing the brewery on end. Includes all mounting hardware. Maximum weight 30 lbs.
Please see the options.
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless tri-clover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing.
If you would like a thermometer installed in the Boil kettle, Mash Tun or HLT please see the options.
Optional Sight Gauge
You can also get a sight gauge installed on your Boil kettle or HLT.
Optional Whirlpool Arm
If you would like a whirlpool arm assembly added to your Boil kettle please see the options.
- 3 piece ball valve w/tri-clamp connection.
Optional 50 Foot Immersion Chiller
50 ft. Immersion Chiller is coiled with 3/8" copper tubing and fitted with quality brass garden hose connectors. If you would like to add a 50' Immersion Chiller please see the options.
Optional Extra Pump Bracket and Pump with Overflow Valve
While this system only requires one pump to be fully operational, some of our customers have asked for and additional pump and pump bracket for other uses in their brewing process.
These are separate options, if you want an additional pump or pump bracket or both, please see the options.
Optional Color Choices:
Ruby Street Brewing now offers an option for several different colors, please click the link below to view the different colors they now offer. The cost for this is $199.00
If you wish to choose another color other than their standard red, please use the text box below in the add on section and enter the color code from the link above in the text box during your purchase. Please allow approximately 3 weeks lead time for this option.