Beer Brewing and Kegging Supplies • 1-313-277-2739 • Serving Homebrewers Since 1999

USA, Canada, Global Shipping

$16 Off Orders Over $100! View Terms

Home>Brewing Equipment>Fermenting Equipment>Siphon Hose Tubing

Sold by the foot

Silicone High Temp Tubing 3/8'' ID - Per Foot

Item Number:92-4088A

AVERAGE RATING
review

1 Review(s)

Your Price:$1.89

Quantity

Reward Points 2 points will be rewarded to you when you buy this item.

Questions about this item? Ask here.

(See 7 Questions)

Description
CUSTOMER REVIEWS
Questions and Answers

Silicone High Temp Tubing 3/8'' ID - Per Foot

Will burst @ 30 PSI @ 70*F- Should only be used with magnetic drive pumps

Do not use with household water pressure

Made from FDA-sanctioned ingredients

Able to resist extreme temperature variation: -100F to 500F

Translucent natural color for visual contact with the flow

Resilient, stretchable, and resistant to compression set

Odorless, tasteless, and inert

Good electrical and weather ability properties - resists U.V., ozone, gases, and moisture

Listed by the National Sanitation Foundation (NSF 51)

Most flexible tubing I've found

This stuff is great. Super flexible at just about any temperature; hot or cold. Easy to clap down and easy to cut. My only complaint is that it seems to "attract" dirt/debris you never knew was there and it sticks to the outside of the tubing. Not a big deal since it is on the outside of the tubing, but it bothers the OCD side of me.

Reviewed by: JKAUTZ on 3/14/2016

Q: Is this tubing pliable enough to work with 1/2 barbs for quick disconnects?

Asked by: Casey - 8/7/2017

A: The tubing is somewhat flexible but would be best to use the 1/2" ID tubing in its place

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Aaron (8/7/2017)

Q: Does this tubing fit well on 3/8" barb such as the elbow barb with 90 degrees angle?

Asked by: Thomas Sjoberg - 6/10/2017

A: Yes, The ID of this tubing would allow it to fit fine onto any 3/8" barbed fitting on the site

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Aaron (6/10/2017)

Q: Is this product suitable for 5+ year life expectancy, handling engine ethalyne/propolyne glycol coolant and sustained 20PSI usage?

Asked by: Ed - 9/22/2016

A: I can not accurately answer that question for you. My experience with this hose is with beer making, I am not familiar with the wear and tear of such chemicals on silicone.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Desiree (10/15/2016)

Q: Would this work well for bottling and attaching to a bottling wand that is 3/8" OD, or is the diameter too big to get a good tight fit?

Asked by: Jerry Retzloff - 11/30/2015

A: I would recommend the 3/8" siphon hose (24-4852). This will provide you with a good tight fit.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Desiree (12/2/2015)

Q: Can this hose be used to drain wort at flame out (at boiling temp) to another vessel?

Asked by: brian - 8/10/2015

A: This beer can handle boiling temps so it can be used to transfer beer after the flameout.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Robert (8/10/2015)