Q: What brand is this stout tap. I'm looking for a Micro-matic.
A: this part ID is for the Krome Dispense product, the Micromatic version can be found under part ID 54-2314
Q: Does this stout faucet stainless steel internals?
A: The faucet has a plated exterior and stainless interior where there is beverage contact
Q: I'm looking for a replacement gasket/o-ring for this faucet. It's where the faucet connects to the tower. It would be part# 13 in this diagram:
Do you sell that part?
A: We do, this can be found under part #91-2452 on our site
Q: Do I need a Nitrogen Faucet to use Nitrogen or can I use a regular Faucet?
A: You can use a standard faucet when dispensing with Nitrogen but just will not get the same pour or cascading effect you'd expect using a nitro facuet with a restirctor plate inside
Q: Is that all that's required to switch to nitro I just change the faucet and Gas tank?
A: The system requires a nitrogen regulator as well.
Q: Are the wetted parts of the faucet Stainless Steel?
A: This faucet has a stainless steel spout and restrictor plate, but there are chrome plated brass parts that come in contact with beer.
Q: Can you use a stout faucet with a traditional CO2 system?
A: You can, but you aren't going to see the benefits of pushing your beer with nitro.
Q: What is the appropriate shank for this faucet? I have picked out the 4 1/8" shank with (40-3931)with complete 3/16" tail piece added. Presumably this tail piece will accept a beer line and clamp.
A: Our standard 4 1/8" shanks will accommodate this stout faucet. The 3/16" tailpiece assembly is sized for standard 3/16" beer line, which we also sell ( Item Number 91-28180A ).
Q: Will this faucet fit in the tower that I bought from you? The tower I bought is 40-1874. If not, is there a stout faucet that will handle beer gas that I can fit in my tower?
A: The Stout faucet will fit on your tower. You will just need to replace one of your current faucets with the stout faucet.