Fully Assembled - CO2 Tank and Regulator NOT INCLUDED

The Adapter CO2 regulator to Paintball Tank Adapter

4 Review(s) Send your review

Your Price: $9.99

Questions? Ask here.

Item Number: 99-2032

Availability: In stock

need a regulator?

Paint Ball tank?

Quantity

10 points will be rewarded to you when you buy this item.

Description
PRODUCT REVIEWS
Questions and Answers

The Adapter CO2 regulator to Paintball Tank Adapter

Take a look at this cool new item we just had made.

Made of anodized Aluminum, this adapter allows you to attach a paintball CO2 tank to your existing keg system CO2 regulator. Why buy expensive secondary equipment that only has one purpose when you can make use of your existing equipment!

Makes portability of your homebrew a breeze! Perfect for camping, boating, picnics, parties, events or just sitting in your backyard! While we do not recommend this for carbonating (we just don't like using all of our CO2 at once), this is perfect for dispensing.

Add on a regulator or paint ball CO2 tank to make your system portable now! All CO2 tanks are shipped empty.

Wholesale Inquiries Welcome

Q: What size wrench does this adapter take?

Asked by: Dave - 9/14/2020

A: this would require a 1" wrench

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (9/14/2020)

Q: I'm also having problem with Co2 spraying out of the hole on the side of the adapter. The tank is 20oz Tippmann. Chaging out the O-ring on the tank with new ones from Tippman, and lubricating it with the petrol gel keg lubricant don't work. The tank's O-ring is just not making good connection with the inside of the adapter. The only way I've found that works is putting teflon tape around the thread of the Co2 tank. From searching on the net, this seems to be a common problem with these adapters. Perhaps some are just not made well. Do I have a defective adapter? Is teflon needed if the tank fits properly with the adapter?

Asked by: Jack - 6/22/2020

A: Teflon should not be needed for the fitting to function. The normal issue pertaining to the gas leaking from the weeping hole is due to a damaged gasket, or the gasket being over-compressed when engaging with the tank thread. The lubricate aids in limiting damage to the gasket as it is threaded in place, as the gaskets are prone to damage if not lubricated well

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (6/23/2020)

Q: Will the adapter the stem in the middle to let the air out of the tank when compressed? I need to be able to connect a hose then have the air come out upon demand

Asked by: Marshall jones - 4/22/2020

A: once completely threaded onto the tank, the pin on the tank itself will be compressed by the adapter to bleed off gas

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (4/22/2020)

Q: Is this a CGA320 female to male W21.8/din 477 adapter

Asked by: Mario - 2/27/2020

A: The male side adapter on this fitting is CGA320 and the thread on the other side for the tank is 5/8-18 UNF

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (2/27/2020)

Q: Does it come prefilled

Asked by: Thomas Light - 2/8/2020

A: This listing is for the adapter. All of our Co2 tanks ship empty.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Lauren Acton (2/8/2020)

Q: will the c02 adapter to paintball tank work on a soda syphon? i want to replace the little cartridges with a line to my co2 tank for delicious seltzer.

Asked by: brian - 11/22/2019

A: This fitting is designed to fit a paintball thread on the female side, and CGA320 Standard co2 thread on the other. It is possible some Soda dispensers use the paintball thread to connect on the female end, but could not guarantee this 100% with all manufacturers

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (11/22/2019)

Q: Using the CO2 regulator adapter, what order do I need to attach parts. Do I attach the adapter to the tank, then screw that into the regulator... or do i attach the adapter to the regulator, then screw the tank in?

Asked by: Carl Swartzendruber - 4/10/2019

A: the adapter would be threaded into the hex nut on the regulator, and then the paintball tank into that connection. Threading the paintball tank onto the adapter, without being on the regulator would depress the release pin on the paintball tank and bleed of gas if not secured into the hex nut on the regulator for a closed connection

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (4/10/2019)

Q: Will this adapter allow me to fit a sodastream tank to a CO2 regulator for use in homebrewing?

Asked by: Louis Laurenti - 2/13/2019

A: The fitting is guaranteed to work on Standard paintball tank threads, but may be slightly different from proprietary threads on countertop soda dispensers. Checking the thread to see if it is the same as a Paintball tank thread would be best before ordering

Was this answer helpful? 0 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (2/13/2019)

Q: Is this 5/8 to cga320

Asked by: Tj - 1/1/2019

A: this fitting is CGA320 male on 1 side and female 3/4" paintball thread on the other

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/2/2019)

Q: Does this adapter have the pin that opens up the paintball tank to allow the CO2 to flow into the regulator ? I already have the paintball tank and a regulator with the CGA 320 fitting. Thanks. Ryan

Asked by: Ryan - 10/4/2018

A: Correct, the male threaded side would be the CGA320 side for the regulator, and the female side would be your tank connection that will have the pin to engage the Paintball tank

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Aaron (10/8/2018)

Q: What is the male thread on this adapter? Is it pipe thread? I need a paintball tank to pipe thread adapter.

Asked by: Kyle Ogden - 3/12/2018

A: The male side thread is a standard CGA320 fitting side to use in conjection with the female hex nut on a standard co2 regulator

Was this answer helpful? 2 of 2 Guest(s) found this Answer helpful.

Answer provided by: Aaron (3/12/2018)

Q: When I attached this to my regulator and screwed in the paintball tank, the gas seems to just spray out of the small hole in the side of the adapter, no matter how tightly I screw either piece in. Is this a common problem?

Asked by: Ben - 1/6/2018

A: This is normally only found when there is a flaw in the gasket on the paintball tank it self or the gasket is missing to make a solid connection. adding a bit of food grade lubricant to the gasket will help limit damage while threading into the adapter, but starting with the tank gasket would be the first rouble shooting step as this normally resolves the issue in 99% of cases

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (1/7/2018)

Q: What is the thread specification on the male end of the adapter? And is it right hand or left hand?

Asked by: Aaron Butler - 8/31/2017

A: the thread would be a standard CGA 320 male thread and be a right hand twist

Was this answer helpful? 1 of 3 Guest(s) found this Answer helpful.

Answer provided by: Aaron (9/1/2017)

Q: Will,this convert my sodastream canister to a refillable one?

Asked by: Katherine - 8/24/2017

A: Unfortunately no, these are designed to fit a paintball tank onto a standard CGA320 co2 stem for a regulator

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Aaron (8/25/2017)

Q: So I don't need an On/off regulator, I just attach the adapter to my regulator and then to the tank, but how do you separate the regulator from the tank again for a refill? it looks kind of tricky and dangerous.

Asked by: Diego - 7/23/2017

A: YEs, you will need a regulator to operate the paintball tank safely and effectively. The adapter bridges the gap between the paint ball connection on the hex nut on the regulator that normally connects to a standard CGA320 valve stem.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Aaron (7/24/2017)

Q: Hey there - what exactly is the thread size of both male and female ends of this adapter?

Asked by: michael hodson - 7/21/2017

A: The internal thread opening is 3/4" and the male thread will be a standard thread used to connect to a CGA320 Co2 nut and stem

Was this answer helpful? 2 of 3 Guest(s) found this Answer helpful.

Answer provided by: Aaron (7/22/2017)

Q: does this type of adapter CO2 regulator is available for 48 cubic inches volume paint ball tank or the same thing can be used for 48 cubic inches bottle??

Asked by: prabhat - 8/9/2016

A: We have not tested this, but it looks promising. If the 48 cubic inch tank is the standard paintball fitting it should work fine.

Was this answer helpful? 1 of 1 Guest(s) found this Answer helpful.

Answer provided by: Jeff (11/22/2016)

Q: What is the difference between this and 63-4225?

Asked by: Brad - 6/20/2016

A: Thanks for the question! The difference between 63-4225 and this product is that item 63-4225 is designed to thread directly into the regulator. This adapts the thread from a paintball tank to fit into a regular Taprite regulator. That way you don't have to have a regulator just for a standard sized co2 tank.

Was this answer helpful? 0 of 0 Guest(s) found this Answer helpful.

Answer provided by: Tim (7/6/2016)

Q: Do I need to use an on/off valve with this adapter? I didn't see one pictured in the setup on the website. This is my first time with a keg system, and I don't want to blow my regulator. Thanks.

Asked by: Peter - 3/29/2016

A: You just attach this to the regulator and then the tank to this adapter. The regulator has a shut off valve and also a check valve.

Was this answer helpful? 4 of 5 Guest(s) found this Answer helpful.

Answer provided by: Desiree (3/30/2016)

Q: Should I use Teflon tape on the threads of the paintball tank, or is it designed to seal without tape?

Asked by: jmg - 2/27/2016

No Answers have been submitted yet.

Questions? Ask here.

Paintball Adapter II (left hand thread)

~~$10.39~~ $6.99

In stock

Select Options

Paintball Adapter II (right hand thread)

~~$12.99~~ $6.99

In stock

(2)

Select Options

20 oz Paintball CO2 tank with Adapter

$39.99

In stock

Select Options

The Adapter II Paintball Gauge

$52.98

In stock

(7)

Select Options

Go to Top of Page

The Adapter CO2 regulator to Paintball Tank Adapter

Q: What size wrench does this adapter take?

Q: Will the adapter the stem in the middle to let the air out of the tank when compressed? I need to be able to connect a hose then have the air come out upon demand

Q: Is this a CGA320 female to male W21.8/din 477 adapter

Q: Does it come prefilled

Q: will the c02 adapter to paintball tank work on a soda syphon? i want to replace the little cartridges with a line to my co2 tank for delicious seltzer.

Q: Using the CO2 regulator adapter, what order do I need to attach parts. Do I attach the adapter to the tank, then screw that into the regulator... or do i attach the adapter to the regulator, then screw the tank in?

Q: Will this adapter allow me to fit a sodastream tank to a CO2 regulator for use in homebrewing?

Q: Is this 5/8 to cga320

Q: Does this adapter have the pin that opens up the paintball tank to allow the CO2 to flow into the regulator ? I already have the paintball tank and a regulator with the CGA 320 fitting. Thanks. Ryan

Q: What is the male thread on this adapter? Is it pipe thread? I need a paintball tank to pipe thread adapter.

Q: When I attached this to my regulator and screwed in the paintball tank, the gas seems to just spray out of the small hole in the side of the adapter, no matter how tightly I screw either piece in. Is this a common problem?

Q: What is the thread specification on the male end of the adapter? And is it right hand or left hand?

Q: Will,this convert my sodastream canister to a refillable one?

Q: So I don't need an On/off regulator, I just attach the adapter to my regulator and then to the tank, but how do you separate the regulator from the tank again for a refill? it looks kind of tricky and dangerous.

Q: Hey there - what exactly is the thread size of both male and female ends of this adapter?

Q: does this type of adapter CO2 regulator is available for 48 cubic inches volume paint ball tank or the same thing can be used for 48 cubic inches bottle??

Q: What is the difference between this and 63-4225?

Q: Do I need to use an on/off valve with this adapter? I didn't see one pictured in the setup on the website. This is my first time with a keg system, and I don't want to blow my regulator. Thanks.

Q: Should I use Teflon tape on the threads of the paintball tank, or is it designed to seal without tape?

Guests Also Bought...