The Mega Ruby 30 Gallon Brewing System (Electric)
Now Offering Free Shipping!
Lower 48 States Only
Because thee are built to order please allow 6-8 weeks to ship from Ruby Street
Electric brewing is silent, economical, and safe for indoor use. The mega electric system includes a full
featured control panel that precisely controls heat to your HLT and Boil kettles, and
allows you to monitor the temps of all 3 kettles right on the panel. The panel also
includes a digital brewing timer/alarm and pump control switches. On the brewery side
you will find all stainless steel elements mounted to the kettles with tri-clover fittings to
allow super easy removal for cleaning.
Complete System Includes:
1-Frame - Welded Steel Construction (powder-coated)
3-30 Gallon Stainless Steel Kettles (with lids)
2-5500 Watt Elements
1-30 amp Electric Panel (with digital temp and pump control)
2-Stainless Steel False Bottoms
2-Thermometers (HLT and Mash Tun)
1-Stainless Steel Pump (with remote On/Off switch)
2-Thru Wall Return Fittings (HLT and mash tun)
1-HERMS Coil System
All SS Tri-clover Fittings & Silicone Tubing
Complete Owners Manual (with 1 year limited warranty)
Electric Panel Features:
Wall Mounted all stainless steel control panel
6’ (4 wire) power supply cable with plug
3 Digital PID Controllers for setting and monitoring your process temps
1 Multi Event Brewing Timer with Alarm
2 On/Off Switches for pumps
2-4 Stainless steel 4500-5500 Watt elements (depending on model)
3 Temperature probes with quick disconnect cables
Key style power switch for secure storage
Locking mushroom button stops all power to elements and pumps
Safety Interlock Relay disables system if any switch (pump or element) is on during power-up
Displays temperature in either Fahrenheit or Celsius (user selectable)
Welded in tri-clover element adapters allow for easy element removal
Power Supply Options/Requirements:
All Electric – 240 VAC - 30 Amp GFCI
Pump(s) - 110-120 VAC (50-60Hz) – 220v pumps available for international
System: 71.5” wide x 27” deep x 69” high – with kettles
Kettles: 22.5” wide x 19”deep
There are many ways to make this system your own by choosing all or only the options you want, please take a look at these options and select the one's that fit your style of brewing.
Now included, the HERMS System:
HERMS - (Heat Exchange Recirculating Mash System)
The HERMS System is used to maintain mash temperatures and perform step mashes without direct fired heat. The HERMS coil offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun. The coil is factory installed only and pressure tested before it ships.
The HERMS system will include:
50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)
Optional 50 Amp Control Panel Upgrade
The Ruby Street electric system now offers this great option with the ability to simultaneously heat the HLT and Boil kettles at 50% power.
Each of these kettles has (2) elements in the kettle. This new upgraded panels now allows you to run 2 elements in either, or 1 element in both (100% HLT, 100% Boil, or 50/50) with a convenient selector switch.
The biggest benefit of this is time savings, as this allows you to begin preheating your boil runoff while still maintaining your HLT temp. This will allow you to boil almost immediately upon hitting your target runoff volume. The biggest benefit of this is time savings, as this allows you to begin preheating your boil runoff while still
maintaining your HLT temp. This will allow you to boil almost immediately upon hitting your target runoff volume.
Please see the options.
Optional Thru-Wall Return Fitting
Many brewers prefer to re-circulate and/or sparge with the kettle lids on. The thru-wall return fitting option makes this process easy. This fitting is generally mounted at the top of the kettle just below the rim.
Already included is the thru-wall fitting mounted in the Mash Tun and HLT and will include a cork float silicone sparging hose to eliminate splashing.
Thru-wall fitting mounted in Boil kettle will include a silicone tube that reaches the bottom of the kettle to prevent splashing. This is optional please see options.
Utility Shelf Option:
Need a place to set your beverages, spoons, refractometer, etc. while brewing? We now offer a removable accessory shelf that fits perfectly on our Ruby Street Brewery™ and Mega Ruby™ frames and systems.
Machined from high density plastic, this 10" x 15" shelf includes 4 recessed beverage spots and steel hardware powder coated in our signature red. Attached with a single steel pin, this shelf can be removed in seconds so it doesn't interfere with standing the brewery on end. Includes all mounting hardware. Maximum weight 30 lbs. Please see the options.
Optional Whirlpool Arm
If you would like a whirlpool arm assembly added to your boil kettle please see the options.
3 piece ball valve w/tri-clamp connection.
Boil Kettle Thermometer Option
If you would like a thermometer installed on your boil kettle, please see the option.
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless triclover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing.
Sight Gauge Option
Now you can get a sight gauge installed on your Boil Kettle or HLT. Please see the options.
Plate Chiller Package:
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame. Please see options.
Plate Chiller Package Includes:
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Bracket to fit any of our frames powder coated to match
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
· Can be sold and shipped with Ruby Street systems and frames.
Optional 50 Foot Immersion Chiller
50 ft. Immersion Chiller is coiled with 3/8" copper tubing and fitted with quality brass garden hose connectors.
If you would like to add a 50' Immersion Chiller. Please see the options.
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6" x 14" 300 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.
Optional Extra Pump Bracket and Pump with Overflow Valve
While this system only requires one pump to be fully operational, some of our customers have asked for and additional pump and pump bracket for other uses in their brewing process.
These are separate options, if you want an additional pump or pump bracket or both, please see the options.
Optional Color Choices:
Ruby Street Brewing now offers an option for several different colors, please click the link below to view the different colors they now offer. The cost for this is $199.00
If you wish to choose another color other than their standard red, please use the text box below in the add on section and enter the color code from the link above in the text box during your purchase. Please allow approximately 3 weeks lead time for this option.