Tower of Power 10 Gal RIMS System
-1 Blichmann Boilermaker G2 15 Gallon Brew Pot (for boiling pot)
-2 Blichmann Boilermaker G2 10 Gallon Brew Pots (1 for the HLT and one for the mash tun; mash tun includes the false bottom and comes with an L1 hole punch for auto sparge)
-1 Blichmann Tower of Power Tower Stands (with March pump)
-1 Blichmann Hop Blocker
-1 Blichmann Auto Sparge Kit for the Mash Tun
-5 Blichmann Boilermaker SS Hex Nipple 1/2 NPT
-1 Blichmann TopTier Base Stand
-3 Blichmann TopTier Burners for use with stand
-2 Blichmann Quick Connector 1/2" X 1/2" Straight Barb
-4 Blichmann Quick Connector 1/2" X 1/2" 90 degree elbows
-2 Blichmann Tower or Power Control Modules
This assembly also includes 14' of 1/2" silicone tubing, 1 (one) 1/2" SS Tee, and 6 SS hose clamps.
Additional Items Required:
Due to the modularity of the TopTier™ Modular Brewing Stand, which is its best feature, you are required to purchase a couple pieces of 1/2" pipe and assemble a gas manifold for it.
For example, you could have one-, two- or three-burner tiers (balance being shelves) needing fuel, and these can be installed on any of the four faces at any height. Had we designed a limited fixed configuration stand like our competitors, we would have included the piping. But that means you'd be stuck with that configuration and could never change it as your equipment, batch size and brewing process changes and develops.
Fortunately, we do include nearly all the fittings you'll need. With the product, you'll receive a black iron tee, a brass flare adapter for each tier, and also a plug to cap off the top of the manifold. All you'll have to provide are the straight lengths of pipe, which are readily available in a variety of lengths at your local hardware store or home improvement center. If you want a specific length, many of these stores will cut and thread your pipe to length for free or for a small fee. If you don't have a plumbing-supply store nearby, McMaster-Carr is an online source for these parts.
The manual provided with the stand includes detailed instructions and photos on assembling your manifold, which is a simple process. We also provide a nice stainless-steel, bellows-type gas hose to connect the burner to the manifold, as well as hardware to mount the pipe manifold to the stand. These are the more difficult and expensive parts to acquire that are not available at the above stores.- See more at: http://www.blichmannengineering.com/products/topti...